Silver Miata Mx-5 Convertible Manual Leather Bose Sound on 2040-cars

Auto blog

Mazda rumored to bring rotary-powered RX-9 concept to Tokyo

Stop us if you've heard this one before: Mazda will bring a rotary-powered sports car to the next big auto show. Okay, so we stopped for a second, but the show must go on. Following an official teaser image (shown above) late last month, Motoring.com.au has what it claims are renderings of the curvy, two-door coupe – called the RX-9 – that Mazda will bring to the Tokyo Motor Show later this month. The images show a far softer styling than Mazda's current crop of Kodo-inspired vehicles, while the overall look screams of a modern-day Cosmo Sport, the Japanese brand's first rotary-powered vehicle. And though that connection alone might be enough to justify whisperings of a successor to the RX-7 and RX-8, Motoring claims there will be an even more overt sign of this concept's power source. "Look to the Cosmo Sport," an inside source told the Aussie website, signaling that the Mazda stand would feature the vintage two-door. "The Cosmo has no earthly reason for being there unless..." The rotary rumor, if it comes true, won't exactly be what we're use to. While Motoring brings up the previously reported 16X – a 1.6-liter two-rotor – it builds on our 2013 report. According to the Aussies, the new engine could feature a two-stage electric turbocharger, be paired with a hybrid powertrain, offer up to 450 horsepower, and we're guessing, be hilariously complicated. Joking aside, it sounds like Mazda's goals here are admirable. A rotary-equipped sports car that could counter the 1.3-liter RX-8 engine's appetite for fuel and improve on its mediocre low and mid-range torque would be interesting indeed. As for those renderings, Motoring has front and rear three-quarter images. Comparing the rear with our original teaser leaves the look open to interpretation, but after seriously upping the exposure on the teaser (thanks Photoshop), the taillights and overall profile shape look to be a spot-on match. In front, the long hood shares some Kodo elements, like the headlights and grille, but its undeniable coupe shape – a long hood and very short deck – are far more organic and, dare we say, calm, than Mazda's other vehicles. You can take a closer look at the renderings over at Motoring's website. Do that, and then head back and let us know what you think of these RX-9 rumors. Is Mazda finally going to be bringing a rotary back to market?

2016 Mazda CX-9 caught on video

We already know from earlier spy shots that the second-generation Mazda CX-9 is advancing in development, but here's an opportunity to actually see the crossover on the road. The video shows the CX-9's rear, but wait 50 seconds for a good look at it in profile and from the front. The CX-9 is no longer wearing the same camouflage from the last spy photos, but this time it has more cladding to hide the lines. Even with the obfuscation, you can still get a sense of the general shape. The CUV largely looks like a stretched version of the CX-5, which is a great place to start. Rumors suggest the new CX-9 will debut in November at the 2015 Los Angeles Auto Show and to launch in 2016 for the 2017 model year. Power is tipped to come from a turbocharged, 2.5-liter Skyactiv four-cylinder, and all-wheel drive is expected to be available. Related Video:

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.