Hardtop Leather Heated Seats 1 Onwer Rare Color Wont Last L@@k!!!!!!!!!!!!!!!!!! on 2040-cars

Auto blog

Weekly Recap: GM plans massive new paint shop at Chevy Corvette factory

General Motors is laying out some serious green to maintain the Chevy Corvette's expansive color palette. The automaker is breaking ground on a new paint shop this summer that's part of a $439-million investment to upgrade the 34-year-old Bowling Green, KY, factory that builds the Stingray. The massive new structure will total 450,000 square feet, nearly half the size of the current 1-million square-foot facility. Construction is expected to take two years and won't impact Corvette production. The upgrades include new robots that save paint and create a better finish, longer, more efficient ovens to bake in the finish, and LED lighting. There's also a dry scrubbing booth technology with a limestone handling system that eliminates waste. GM has invested $135 million in the factory in last four years for the changeover to build the C7 and to relocate its Performance Build Center to Bowling Green. The improvements continue to modernize the Kentucky factory, which has become a tourist attraction in its own right, as more than 56,000 enthusiasts visited it last year. The upgrades are part of a $5.4-billion investment GM confirmed in April that will remake its US footprint in the next three years. The Bowling Green expansion underscores GM's continued commitment to the Corvette, which sold nearly 38,000 copies around the world last year, an eight-year high. "With this major technology investment, we can continue to exceed the expectations of sports car buyers for years to come," North American manufacturing manager Arvin Jones said in a statement. OTHER NEWS & NOTES Takata recall hits 34 million vehicles The National Highway Traffic Safety Administration expanded the Takata airbag recall to an almost unthinkable 34 million vehicles on Tuesday. The recall is part of an agreement reached by the two sides where Takata admitted some of its airbag inflators have a defect, and the deal compels the company to comply with all future regulatory actions and investigations. Takata's airbag inflators were produced with "a propellant that can degrade over time" and lead to ruptures, NHTSA said. Six deaths have been attributed to the flaw worldwide. Investigations conducted by Takata, automakers, and others have not determined the exact cause of the inflator problem, but NHTSA said moisture appears to alter the propellant's chemical structure. It then ignites too rapidly, creates too much pressure that ruptures the inflator, and blasts shards of metal at passengers.

2016 Mazda MX-5 Miata will rock 2.0L SkyActiv engine in US, 1.5L elsewhere

Let the speculation finally end - we know what will power the next-generation 2016 Mazda MX-5 Miata, and it's not turbocharged. The US model will get a SkyActiv 2.0-liter engine and six-speed manual, while models in the rest of the world have a 1.5-liter engine, confirming earlier rumors.
Unfortunately, Mazda isn't letting loose how much power either of these mills make just yet. For sake of comparison, the current SkyActiv 2.0 in the Mazda3 produces 155 horsepower and 150 pound-feet of torque, and the 1.5-liter in the UK (and elsewhere) has about 99 hp and 110 lb-ft of twist. However, the current Miata produces 167 hp and 140 lb-ft.
But fret not droptop fans. The company's brochure from the 2014 Paris Motor Show confirms, "all available drivetrains have been specially tuned for the all-new MX-5," which at least hints at the possibility of more performance. Also, even if the numbers remain untouched, the new Miata should feel even more sporting on the open road. That's because Mazda says the new model weighs in the neighborhood of 2,200 pounds; with that in mind, the 2016 car would boast around 14.19 pounds per horsepower versus 14.85 lb/hp in the present MX-5. Progress!

Takata airbag recall spreads to China with 42k Mazda sedans

The scope of the problem with the faulty airbag inflators from Takata continues to broaden and is now reaching China, as well. Mazda is recalling 42,732 Mazda6 units there, produced by its local joint venture partner China FAW Car Company, to replace the front passenger airbags. It comes as part of Mazda's recall of nearly 160,000 vehicles worldwide, including about 34,600 in the US, according to Reuters.
This is the same problem that caused seven automakers in the US to recall an estimated 2.1 million vehicles in late June. The airbag inflators can potentially explode instead of deploying the airbag, which hampers the bag's inflation. In some cases occupants are also hit by the metal shrapnel, which can cause further injuries. In the US, Mazda is repairing the 2003-2007 Mazda6 (pictured above), 2006-2007 Mazdaspeed6, 2004 MPV and 2004-2008 RX-8 originally sold in or currently registered in Florida, Puerto Rico, and Hawaii.
This is hardly the first instance of this issue. Since 2001, there have been 20 recalls tied to the exploding airbags supplied by Takata. The problem is possibly linked to the propellant in the inflators, but there's no conclusive evidence of that yet. Most of the automakers in the US limited the most recent recalls only to a few humid states because moisture potentially exacerbated the problem.