5 Speed Manual Florida Owned Am/fm With Remote Low Miles on 2040-cars

Auto blog

Autoblog readers meet the 2016 Mazda MX-5 Miata [w/video]

Mazda dropped off a 2016 MX-5 Miata at our office this week with only two stipulations: don't break it, and don't talk about driving impressions until 3:01 AM Eastern on Monday, June 1. Easy enough. But rather than hold our notes until the embargo lifts, we decided to do something different. By now, you've no doubt read all there is to know about the 2016 Miata, including our review of the Japanese-spec car with the 1.5-liter engine that isn't coming to North America. You know it's smaller than the outgoing NC model. And you know that, at 2,332 pounds, it's nearly as light as the original. But what you, and we, didn't know, is what Miata owners think about the 2016 model. The MX-5 group is incredibly enthusiastic, and they love their cars. Hell, they love each other's cars. So we gave them an opportunity to not only get together, but to get an up-close, informal look at the ND Miata outside of an auto show, several months before it officially goes on sale. Here's what we did. Cars And Coneys Anyone who's familiar with the Woodward Dream Cruise in metro Detroit has no doubt heard of Athens Coney Island in Royal Oak, MI. It's an iconic place, known for its top-notch coney dogs, quick service, and the fact that, on pretty much any warm-weather weekend, you can find cool cars in the parking lot. We called the folks at Athens, told them about our Miata meet-up, and they were immediately on board with coneys, soda, and coffee for our gathering. We first published our meet-up info late last week, and sent the details out on our social media channels, as well. But without any formal RSVP system, we had no idea how many people would show up. And since Mother Nature decided to provide us with gray skies and chilly temperatures, we figured a lot of would-be attendees opted to bail at the last minute. Needless to say, we were surprised to see several Miatas already lined up in the Athens parking lot when we arrived with the ND at 4:40 PM, 20 minutes before the listed 5:00 start time. No one kept a formal count, but our best guess is that something like 50 or 60 cars showed up over the course of three hours. Some folks stayed the whole time, some people only stopped by for a quick cup of coffee. A couple people drove long distances to attend – a few Miatas hailing from southern Ohio, and many from western Michigan. We had a huge mix of cars, too.

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

Mazda's next-gen SkyActiv engines will drop spark plugs in favor of high compression

Homogeneous charge compression ignition, or HCCI, is the black art of internal combustion engines that aims to produce diesel-like fuel efficiency for the cost of gasoline. Although some of its competitors have developed and subsequently given up on the tech, Mazda confirmed that the next-generation of SkyActiv engines will employ HCCI technology, improving fuel economy by 30 percent and at the same time reducing exhaust emissions. According to Nikkei, a new SkyActiv family of engines is set to debut under the hood of the next-gen Mazda3 sometime in 2018 before making its way into other vehicles. In simple terms, an engine that uses HCCI burns the air/fuel mix using pressure instead of with spark plugs, just like a diesel. At 14:1, Mazda's gasoline engines already have some of the highest compression ratios out there, but a move to HCCI means cranking up the compression to 18:1. While the tech sounds relatively straightforward, using HCCI means dealing with a number of side issues. It's one of those "on paper" ideas that compounds problems when put into practice. Heat, revs, and fuel must all be carefully managed as gasoline doesn't burn the same way as diesel. Mazda is mum on details, but the automaker seems confident that the issues have been sorted. If the new engines do indeed make it to market with HCCI, Mazda will have out-engineered GM, Daimler, and Hyundai, all of which have tried and failed to develop HCCI engines in a cost-effective package. With the market moving towards electrification, it's interesting to see Mazda still focusing so heavily on traditional internal combustion gasoline engines. It's an indication of where they see the market heading for the next few years. Although the automaker has been hesitant to move forward with hybrid and electric powertrains, Nikkei also reports that Mazda will begin mass production of EVs in 2019. Related Video: