2011 Grand Touring Used 2l I4 16v Automatic Rwd Convertible Premium Bose on 2040-cars

Auto blog

Mazda CEO says rotary not viable, so don't look for a new one

We have some very sad news to report, rotor-heads fans: Don't expect a new rotary-powered vehicle anytime soon. This comes straight from Masamichi Kogai, the CEO of Mazda, which is the only company to ever market a commercially successful rotary-powered automobile in the world. The issue, as it has pretty much always been, is environmental.
While the Wankel rotary engine does indeed make a lot of power in a small, lightweight package, it does so while burning lots of fuel and emitting lots of noxious gases into the atmosphere, at least when running on gasoline. And that means the rotary engine will likely only ever be able to power niche vehicles. And that, in turn, means that it is very difficult to turn a profit on vehicles with rotary engines, particularly for a small automaker like Mazda.
"It has to be a viable commercial proposition. If we are going to adopt it, it has to be a product that can generate at least sales of 100,000 units a year. We have to be able to achieve a profit," said Kogai in an interview with Automotive News. Mazda sold 56,203 RX-7 models in the United States (the automaker's biggest market) in 1986. Sales of the RX-8 peaked in 2004, its first full year on the market, with just 23,690 units.

This California rally is vintage Japanese car heaven

What's so good about the future? This is what I was thinking when some folks at Mazda invited me and a handful of other journalists to join them on the second-annual Touge California. It's a rally for classic Japanese cars that covers a huge chunk of Southern California's twistier roads, where fans get to test their beloved machines. Oh, and it attracts swarms of admirers with cameras. "It is not a race. It is a vintage touring rally," said Ben Hsu, editor in chief of Japanese Nostalgic Car, and one of the coordinators of the event. "In Japan, touge most definitely refers to racing, whether timed, in touge battles, or drifting antics. Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on." Touge California was created to give drivers of Japanese classics a taste, as close as possible, of the types of roads their cars were forged on. We started the day on a mundane stop-and-go freeway drive from Mazda's Irvine headquarters to Escondido, me riding shotgun with my journalist co-driver in a 2016 Miata. But Mazda also brought along three heritage products on this trip – a 1985 RX-7 GSL-SE, a 1978 GLC three-door hatchback, and a 1975 REPU (rotary engined pickup) – serving as reminders of the company's history in the U.S. The group of Mazdas was joined in Escondido by many more Mazdas. And Toyotas, Hondas, Datsuns – so many 240Zs – and the odd Subaru and Mitsubishi. In total, 28 cars were at the start line. "We doubled the field this year, and made the route longer – 200 versus 120 miles," Hsu said. "We separated the cars into two run groups based on speed and a mix of makes and models." I spent the first part of the rally in the Mazda pickup to get a taste of rotary power. It was my first experience behind the wheel of a Wankel-powered vehicle, my first time driving a small Japanese truck from the '70s, and my God that thing has a lot of power. I had a few scares when I had to stand on the brakes, and I found the shift throw's immense length disconcerting – it felt like third gear engaged somewhere in front of the dashboard, with fourth somewhere in the bed. The truck was a great introduction to the rotary, however, and to '70s Japanese cars. Especially in Southern California, old Japanese cars aren't as novel to casual observers as they might be in other parts of the country.

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video: