2009 Competition Yellow Mazda Mx5 #2 Of 318 Produced! Very Rare! No Reserve!!!! on 2040-cars

Auto blog

Next Mazda MX-5 Miata to weigh a ton(ne), literally

Looking at recent spy shots of the fourth-generation Mazda Miata, it's obvious this sporty little roadster will grow in size compared to the current model, but it's also going on a diet. At the Tokyo Motor Show, Auto Motor und Sport sat down with Mazda executive Kiyoshi Fujiwara, who gave a little more insight into the Miata's redesign.
Fujiwara said that they're aiming for a curb weight of a tonne (metric ton), which is 1,000 kilograms or right around 2,200 pounds, for the next-generation Miata. This would make the roadster at least 300 pounds lighter than the current NC Miata, but still about 200 pounds heavier than the original NA.
There is no indication as to how Mazda will go about removing that much weight from the bigger car, but with as popular as the power retractable hard top (PHRT) model is on the current car, the new Miata may ditch this feature to lose its weight. Improving the power-to-weight ratio appears to be a key goal of the Mazda team, so we also wouldn't be surprised to see a more powerful engine underneath the longer hood.

2016 Mazda CX-9 First Drive

Automotive enthusiasts tend to obsess over spec sheets. How else could we know which cars and trucks are the quickest in a straight line, hold the road with the greatest tenacity, or tow the biggest trailers? More succinctly, what ammunition would we have in the seemingly endless back-and-forth of Internet forums if it weren't for specifications? Mazda's engineers think they've found a better way. The 2016 CX-9 has less horsepower than its primary competitors. The only engine available is a turbocharged four-cylinder, hooked to a six-speed automatic. Drivers won't miss the 23 horsepower (or more, as we'll soon explain) lost in the changeover from 2015 to 2016, because Mazda applied its holistic Skyactiv approach to the largest vehicle it offers. That means less weight and, ultimately, more fun. Or so they say. Are they right? Yes. And no. Most of the time, in normal on-road driving conditions, the 2016 CX-9 is the most fun you can have with three rows. But the real-world tradeoff didn't go off completely without a hitch. Reasoning that real-world performance is more important than ultimate horsepower, Mazda specified a four-cylinder for its big, three-row SUV instead of a more traditional V6. Let's get those all-important specifications out of the way: All 2016 Mazda CX-9s are fitted with a 2.5-liter turbocharged four-cylinder with 250 horsepower and, impressively, 310 pound-feet of torque at just 2,000 rpm. Unless you decide to use 87 octane, in which case you'll be limited to 227 horsepower. Mazda doesn't think owners will actually notice the difference in power levels, so there's no Premium Fuel Recommended sticker on the back of the fuel door. Mazda utilized some clever turbo trickery to deliver a diesel-like torque curve from its gasoline-fueled engine, which makes the small-displacement powerplant feel lively at low engine speeds. The flipside is that the CX-9 runs out of breath as the needle swings across the upper reaches of the tach. While that simply wouldn't do for a sportscar like the MX-5, in the CX-9 it's not necessarily a deal breaker. One benefit to the downsized engine is that it doesn't guzzle fuel. The EPA rates the CX-9 at 22 miles per gallon in the city and 28 on the highway. Drop one mpg all around for the all-wheel-drive model. Those figures beat out all the CX-9's most natural competitors, including the Honda Pilot and Toyota Highlander. The turbo-four Ford Explorer matches the 28-mpg highway figure, but loses by three in the city.

Mazda just restored the 787B's forgotten older brother

Among Mazda's many racecars, none is as famous as the 787B, and for good reason. The 787B remains the only Japanese car and the only rotary-powered car to win overall at the 24 Hours of Le Mans. It wasn't Mazda's only successful endurance racer, though. Before the 787B, there was the 767B. Mazda's 767B racecars competed in the IMSA GTP class at endurance races throughout 1989. They featured 630-horsepower four-rotor engines and were very successful in their class. This newly restored car took first and second place class finishes in five of the six races it participated in, and each finish was in the overall top ten. The one exception was a DNF in which the transmission failed. Twenty-five years after the 767B's glory days, Mazda initiated a complete teardown and restoration of the aged car. The work was done by Downing Atlanta and supervised by former Mazda racers Rick Engman and Jim Downing. (Fun fact: Downing was one of the designers of the HANS device.) The shop has also restored other racecars for Mazda, including one of the 787Bs. The car went through a two-year rehab and will make its track re-debut at the Monterey Motorsports Reunion. The event takes place next weekend at Mazda Raceway Laguna Seca where the track will once again feature the angry shriek of a competition-grade rotary engine. Related Video: Image Credit: Mazda North American Operations Motorsports Mazda Automotive History Racing Vehicles Pebble Beach