2006 Mazda Mx-5 Miata Grand Touring, Loaded With Options, Automatic, Serviced on 2040-cars

Auto blog

2019 Mazda CX-5 Turbo First Drive Review | Two-row crossover perfection

Listen: If you're shopping for a crossover, and by all accounts most Americans are, there is no better option on the market than the 2019 Mazda CX-5. When we test drove the all-new 2017 CX-5, we were astounded by its marked improvements over the already-great previous generation. We noted then its biggest drawback was its average 187 horsepower. The CX-5 didn't feel slow, and it certainly made up for it in other ways, like by delivering superior road-hugging abilities. But, it was probably enough to turn off buyers who do their shopping by analyzing spec sheets. For 2019, Mazda addressed that exact issue with a vengeance. With an all-new 2.5-liter SkyActiv Turbo good for 250 horsepower, the CX-5 not only leapfrogs bestselling rivals like the Honda CR-V and Toyota RAV4, but lands squarely in the realm of luxury stalwarts such as the Audi Q5 and BMW X3. When we drove the 2017 CX-5, we likened the handling to that of a Porsche Macan. Now it has the power to match. Among its direct competition, only the 2019 Toyota RAV4 breaks the 200-horsepower mark, ringing in at 203 (and the Hybrid makes an even more impressive 219 ponies), while the Honda CR-V, Subaru Forester and VW Tiguan all sit between 180 and 190. Now, to get the full herd you must fill the tank with 93 octane premium, but if you don't mind leaving a few ponies in the stable you can pump 87 octane for a slight dip to 227 horsepower. The engine adjusts with no ill effects. Even better, torque stays the same no matter what, and the stump-pulling 310 pound-feet of torque comes quick at just 2,000 rpm. The SkyActiv turbo is full of clever engineering tricks, too. There's an exhaust port restrictor, for instance, a narrower channel used only at low engine speeds. Mazda engineer Dave Coleman likened it to a thumb over a firehose, making more exhaust pressure at idle to spool up the turbo, and thus delivering more oomph when you take off from a standstill. Mazdafarians will recognize the mill as the same one that debuted on the 2018 Mazda6. It powers the CX-9 too, Mazda's highly acclaimed three-row crossover. The 3,825-pound CX-5 has 558 fewer pounds to shuffle around than its larger stablemate, making it downright snappy. However, that extra pep does come with a fuel economy penalty, 22 city and 27 highway mpg versus the naturally aspirated version's 24 city and 30 highway mpg.

Japanese students turning Mazda CX-5 into Dakar Rally-ready off-roader

Students at Japan's Nihon Automobile College (NATS) are transforming a first-generation Mazda CX-5 into a full-blown off-roader that looks ready to compete in the Dakar Rally. Named CX-Runner, the one-of-a-kind model will make its debut at the Tokyo Auto Salon opening its doors in January 2020. The Tokyo Auto Salon is the Japanese equivalent of the annual SEMA show, so anything goes under the bright lights. NATS students began the CX-Runner project with a used 2012 CX-5 and seemingly set out to leave as few original parts as possible. While the project isn't finished yet, a sketch released by the school suggests the crossover will receive wheel arch extensions, an external roll cage, a beefier suspension, and a shorter front bumper that increases the approach angle.  Photos published on the school's official Facebook page show the project is moving along nicely. The body extensions are made with a composite material that looks like Kevlar, and fitting the rear wheel arches required sealing the back doors, which is fine; the CX-Runner will be a two-seater. We don't know if students are planning to make changes to the CX-5's powertrain yet, but a thick skid plate will protect whatever is under the hood from expensive impacts with obstacles encountered off-road. nats-mazda-cx-runner-project-1 View 3 Photos The Tokyo Auto Salon will open its doors on January 10, so the students have time to finish the custom-made body kit, install the suspension, paint the CX-Runner, and fit the roll cage. They're not just doing this for fun, though. NATS began offering a customizing class in 1998, and building a tuner car is one of the requirements aspiring builders need to fulfill in order to graduate. With that in mind, it's no surprise that NATS will again have a big presence during the 2020 edition of the Tokyo Auto Salon. In addition to the CX-5 off-roader, its students are building six custom cars including a Nissan 370Z roadster wearing front and rear fascias sourced from a GT-R, a Toyota 2000GT-inspired convertible based on the Suzuki Cappuccino kei car from the 1990s, and a four-door, five-seater Toyota 86 built on Camry bones but powered by the coupe's flat-four engine. Relate Video:

Alfa Romeo takes Spider in-house, Mazda-Fiat roadster partnership not dead

It's officially off. Following a report in March of this year that the marriage of Mazda and Alfa Romeo to produce a MX-5-based Spider was in trouble, the Italians have confirmed that it will take development in-house. "As far as the Spider goes, the final version is of course no longer the two-seater FCA co-developed with Mazda but a derivative of Project Giorgio," Maserati and Alfa Romeo brand boss Harald Wester told Car. For those not in the know, Project Giorgio is Alfa's codename for the rear-drive platform that will underpin the next-generation Spider, not to mention the replacement for the 159 sedan and a few other products. All is not lost for the Japanese-Italian partnership, though. "The Far East import will probably find a new home with Fiat-Abarth," Wester told Car. Yes, you read that correctly, Mazda is still working with FCA, and the result will eventually end up with Abarth's scorpion badge. If anything, we're more excited over this news than the idea of an Alfa MX-5. But we want to know what you think – would you rather Alfa build a new Spider on the Miata's bones, or does an MX-5 Abarth sound like more fun? Have your say in Comments.