Back Up Camera! Sunroof! Sirius Radio! Leather! Remote Start! Heated Seats! on 2040-cars

Auto blog

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

2017 Fiat 124 Spider priced below most Miatas

The Fiat 124 Spider and Mazda MX-5 Miata might be siblings, but all that means is the rivalry between the two cars will be unusually intense. Pricing for the reborn 124 has been released and is added proof of that fact – aside from the very base trim, the turbocharged Italian is cheaper than its Zoom-Zoomy brother. Fiat's base model, the 124 Spider Classica, starts at $25,990. The MX-5 Sport isn't much cheaper, at $25,735. Both cars get 16-inch alloy wheels, black cloth seats, LED taillights, but the Mazda will throw in LED headlights. It's also interesting to note that the two cars have differing destination charges – $995 for the Fiat and $820 for the Mazda. Move up to the mid-range Fiat, and you'll start to see the "Italian" car eke out a pricing advantage. The Lusso, Italian for luxury, rings up at $28,490 compared to the MX-5 Grand Touring's $30,885. Yes, we're comparing the middle-tier 124 to the range-topping Mazda, because the mid-range, enthusiast-oriented Club is more analogous to the 124's Abarth model. The Lusso matches the MX-5 GT with 17-inch alloys, heated leather seats, a 7.0-inch touchscreen with navigation, and dual-zone automatic climate control. The Mazda does come with a bevy of safety features as standard – blind-spot monitoring, lane-departure warning, and automatic high-beam control – which look to be optional on the Fiat, so take that into consideration if you're thinking about buying one of the two. We enthusiasts are most interested in the matchup between the 124 Spider Abarth and the MX-5 Club. The scorpion-badged 124 starts at $29,190 and the Club at $29,420. You'll get more power – 10 additional ponies according to FCA – as well as all the performance goodies from the Club. There are Bilstein-tuned shocks, a mechanical limited-slip diff, and a front strut bar, plus a very imposing exhaust note. Recaro seats will be an optional extra, as will Brembo brakes (the MX-5 bundles them with BBS wheels). Finally, there's the 124 Spider Prima Edizione Lusso. The limited-edition wears Azzurro Italia (translation: pretty blue) paint and rings in at $35,995, which gets you a bunch of swag on top of the normal Lusso stuff. Oh, and if you choose the automatic transmission, you'll be punished with a $1,350 charge, regardless of which Fiata you go for. That's less than the premium Mazda charges for an automatic on an MX-5 Club or GT, but more than the $1,480 extra it charges for a two-pedal Sport.

Asian automakers still reluctant to use more aluminum

There's a logical progression of technology in the auto industry. We've seen it with things like carbon-ceramic brakes, which use to be the sole domain of six-figure sports cars, where they often cost as much as an entry level Toyota Corolla. Now, you can get them on a BMW M3 (they're still pricey, at $8,150). Who knows, maybe in the next four a five years, they'll be available on something like a muscle car or hot hatchback. Aluminum has had a similar progression, although it's further along, moving from the realm of Audi and Jaguar luxury sedans to Ford's most important product, the F-150. With the stuff set to arrive in such a big way on the market, we should logically expect an all-aluminum Toyota Camry or Honda Accord soon, right? Um, wrong. Reuters has a great report on what's keeping Asian manufacturers away from aluminum, and it demonstrates yet another stark philosophical difference between automakers in the east and those in the west. Of course, there's a pricing argument at play. But it's more than just the cost of aluminum sheet (shown above) versus steel. Manufacturing an aluminum car requires extensive retooling of existing factories, not to mention new relationships with suppliers and other logistical and financial nightmares. Factor that in with what Reuters calls Asian automaker's preference towards "evolutionary upgrades," and the case for an all-aluminum Accord is a difficult one. Instead, manufacturers in the east are focusing on developing even stronger steel as a means of trimming fat, although analysts question how long that practice can continue. Jeff Wang, the automotive sales director for aluminum supplier Novelis, predicts that we'll see a bump in aluminum usage from Japanese and Korean brands in the next two to three years, and that it will be driven by an influx of aluminum-based vehicles from western automakers into China. Only time will tell if he's proven right. News Source: ReutersImage Credit: Sean Gallup / Getty Images Plants/Manufacturing Honda Hyundai Mazda Nissan Toyota Technology aluminum