2008 Mazda Cx9 Grand Touring Sports 7 Pass 3rd Row Seats Luxury Suv Fullyloaded on 2040-cars

Auto blog

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7

2017 Mazda CX-9 packs turbo power, fresh style

After nearly a decade of sales, Mazda finally introduces the second-generation CX-9 crossover. It delivers a comprehensive interior and exterior overhaul, blessing the CX-9 with a powerful, efficient Skyactiv powertrain, and instilling even more of the sporting character that makes Mazdas so darn charming. Like every other vehicle in Mazda's catalog, the CX-9 now wears the handsome, suave stylings of the company's Kodo design language. We think it looks great, but feel free to disagree in Comments. The second-generation CX-9 is the perfect example of Mazda's growing interior design prowess. As is so often the case, it's not so much the style but the choice of materials that stands out. Nappa leather can be paired with real Japanese rosewood and aluminum accents to craft a cabin that feels far more expensive than what you might expect from Mazda. The quality is impressive, even on the pre-pre-production prototypes we tested (drive impressions coming soon). The other headline, aside from the gorgeous interior, is the powertrain. The heart and soul of the operation is a new 2.5-liter, turbocharged Skyactiv engine. Although it only produces a modest 250 horsepower, that figure is complemented by a whopping 310 pound-feet of torque. Importantly, torque is easy to access in the lower part of the rev range, with peak twist coming in at just 2,000 rpm. It drops off rather suddenly north of 4,000 rpm, but as Mazda tells it, most consumers rarely venture above that figure. Mazda expects the CX-9's core market to be perfectly happy with the robust low-end output. A six-speed automatic is responsible for doling out that grunt, and is meant to play nicely with the same i-Activ predictive all-wheel-drive system found in the CX-5 (although the two cars don't share any AWD components). Using 22 different sensors, the system measures road conditions 200 times every second and will even send up to half the engine's power to the rear axle. The entire car, meanwhile, rides on the same Skyactiv architecture as the CX-5 and Mazda6, meaning a multi-link rear suspension has been paired with MacPherson struts up front. Eighteen-inch wheels will be standard, although 20s will also be on offer. You can expect to hear much more on just what the new CX-9 is like to drive next week. Until then, enjoy the official images from Mazda, and keep an eye open for live shots from the LA debut, headed your way soon.

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video: