2007 Mazda Cx-9 Grand Touring Sunroof Nav Dvd 20's 90k Texas Direct Auto on 2040-cars

Auto blog

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

Mazda shows lightweight MX-5 Spyder and Speedster at SEMA

Ever since Mazda dropped the first teaser on us last week, we've been looking forward to seeing what it had in store for us at SEMA this year. Now we've seen it what Mazda has dubbed the MX-5 Spyder and MX-5 Speedster, and they were worth the wait. The Spyder goes vintage with a silver paintjob and a brown top stretched overhead. It also has an aero kit, grille, and tonneau cover done up in carbon fiber, rides on 17-inch wheels, and features a natural leather interior. The blue Speedster, meanwhile, goes for the stripped-down, wind-in-your-hair experience. It has no roof or windshield, just a tiny deflector at the front of the dashboard. It's dropped an inch closer to the ground on an adjustable coilover suspension with 16-inch alloys, and features a center-exit exhaust. Carbon fiber helps trim 250 pounds from the curb weight, along with a stripped out interior trimmed in Alcantara. Both look pretty slick, and disappoint only in so far as they (like so many of their predecessor concepts) won't be heading for production. If they were, we'd be hard pressed to choose between the two. Which would you go for? Mazda Reveals Extreme Lightweight Design Concepts at 2015 SEMA MX-5 Concepts Display Two Different Takes on Staying True to Pure, Lightweight Sports Car Philosophy LAS VEGAS (November 3, 2015) – Mazda revealed two design concepts today at the SEMA Show in Las Vegas, based on its all-new 2016 MX-5 Miata—MX-5 Spyder and MX-5 Speedster—demonstrating two vastly different takes on lightweight, open-air performance. Lightweight. Fun-to-drive. Roadster. Those three tenets have served as the foundation for the Mazda MX-5 Miata since its 1989 introduction and continue to serve the new fourth-generation model. Focused, lightweight engineering is a guiding principle of every Mazda vehicle made with SKYACTIV Technology, allowing for greater efficiency, improved performance and agile handling dynamics. But what if that sense of lightweight performance were taken to the extreme? What if Mazda's North American designers harkened back to vintage roadsters to create thoroughly modern, bespoke concepts for what a lightweight performance car should be The results would be the MX-5 Spyder and MX-5 Speedster concepts. "Both MX-5 Spyder and MX-5 Speedster are uncompromising designs that highlight the core strengths of MX-5," said Ken Saward, design manager, Mazda North American Operations.

Mazda rumored to bring rotary-powered RX-9 concept to Tokyo

Stop us if you've heard this one before: Mazda will bring a rotary-powered sports car to the next big auto show. Okay, so we stopped for a second, but the show must go on. Following an official teaser image (shown above) late last month, Motoring.com.au has what it claims are renderings of the curvy, two-door coupe – called the RX-9 – that Mazda will bring to the Tokyo Motor Show later this month. The images show a far softer styling than Mazda's current crop of Kodo-inspired vehicles, while the overall look screams of a modern-day Cosmo Sport, the Japanese brand's first rotary-powered vehicle. And though that connection alone might be enough to justify whisperings of a successor to the RX-7 and RX-8, Motoring claims there will be an even more overt sign of this concept's power source. "Look to the Cosmo Sport," an inside source told the Aussie website, signaling that the Mazda stand would feature the vintage two-door. "The Cosmo has no earthly reason for being there unless..." The rotary rumor, if it comes true, won't exactly be what we're use to. While Motoring brings up the previously reported 16X – a 1.6-liter two-rotor – it builds on our 2013 report. According to the Aussies, the new engine could feature a two-stage electric turbocharger, be paired with a hybrid powertrain, offer up to 450 horsepower, and we're guessing, be hilariously complicated. Joking aside, it sounds like Mazda's goals here are admirable. A rotary-equipped sports car that could counter the 1.3-liter RX-8 engine's appetite for fuel and improve on its mediocre low and mid-range torque would be interesting indeed. As for those renderings, Motoring has front and rear three-quarter images. Comparing the rear with our original teaser leaves the look open to interpretation, but after seriously upping the exposure on the teaser (thanks Photoshop), the taillights and overall profile shape look to be a spot-on match. In front, the long hood shares some Kodo elements, like the headlights and grille, but its undeniable coupe shape – a long hood and very short deck – are far more organic and, dare we say, calm, than Mazda's other vehicles. You can take a closer look at the renderings over at Motoring's website. Do that, and then head back and let us know what you think of these RX-9 rumors. Is Mazda finally going to be bringing a rotary back to market?