2015 Mazda Cx-5 Grand Touring on 2040-cars

Auto blog

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Britain's BBR already promising 2016 Mazda MX-5 Miata with 200+ horsepower

The 2016 Mazda MX-5 Miata is one of Autoblog's most anticipated cars to drive this year, and with good reason. Thanks to svelte, angular styling, the promise of less weight, the possibility of more power and all at a fairly affordable price, it represents pure, automotive enjoyment. Mazda is still not saying exactly how much power the new Miata's 2.0-liter Skyactiv four-cylinder engine will make, but that isn't keeping British tuner BBR from already working out how to squeeze even more ponies from the mill – potentially as much as 200 horsepower with natural aspiration. The company bought a Mazda3 for access to its 2.0-liter Skyactiv and went to work on it. "Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction," said Neil McKay of BBR in the company's release. The 3's version of the engine is rated at 155 hp and 150 pound-feet of torque but is expected to be tuned for additional grunt for the droptop. Still, it gives BBR something to experiment with before the real thing is available. The tuner also got the opportunity to take a look at a pre-production 2016 Miata and is already developing "subtle bodywork alterations" for the upcoming convertible. You can get a taste for the company's plans with the rendering above. It sports tinted lights, a front lip spoiler, lower side sills and a tiny rear spoiler. Scroll down to read more about BBR's plans in the official announcement. BBR UNVEILS STUNNING 200 BHP ALL-NEW MAZDA MX-5 CONCEPT Despite deliveries not scheduled to begin until July, legendary Mazda performance tuner BBR is making great progress with both its visual concept and powertrain development for the all-new MX-5. "A program of detailed performance enhancements has already commenced at our Brackley base," says BBR's Neil Mckay, "thanks to our investment in a 2.0-litre Skyactiv powered Mazda 3. Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction." Having viewed a pre-production version of the car BBR is also working hard on visual enhancements to add more presence to the svelte lines of the all-new MX-5.

2016 Mazda CX-9 caught on video

We already know from earlier spy shots that the second-generation Mazda CX-9 is advancing in development, but here's an opportunity to actually see the crossover on the road. The video shows the CX-9's rear, but wait 50 seconds for a good look at it in profile and from the front. The CX-9 is no longer wearing the same camouflage from the last spy photos, but this time it has more cladding to hide the lines. Even with the obfuscation, you can still get a sense of the general shape. The CUV largely looks like a stretched version of the CX-5, which is a great place to start. Rumors suggest the new CX-9 will debut in November at the 2015 Los Angeles Auto Show and to launch in 2016 for the 2017 model year. Power is tipped to come from a turbocharged, 2.5-liter Skyactiv four-cylinder, and all-wheel drive is expected to be available. Related Video: