2023 Mazda Cx-5 2.5 S Premium Package on 2040-cars

Auto blog

Sorry, rotary fans, Mazda's RX Vision probably won't happen

Mazda is doing a lot of things the right way in this age of beige-ness. It just crammed a turbocharged inline-four into the improved CX-9, a bold move unto itself, and one that should also be heartening for Mazdaspeed fans. Wouldn't that engine make for a swell Mazdaspeed3 or Mazdaspeed6? There's a reasonable ray of hope there, but not necessarily a guarantee. The RX Vision, though, is a pipe dream. Mazda is smart to keep the rotary dream alive. It's smart to keep developing it in back rooms and to keep the idea on the public's mind. Credit where credit's due: Mazda has solved some of the stickiest issues the rotary engine has, through savvy engineering and perseverance. We've seen promising patent filings for the Skyactiv-R engine, which is supposed to be found in the RX Vision concept. Mazda uses every opportunity to remind us that development is continuing and that the company would love to bring a rotary-powered sportscar to production. I believe it. But the RX Vision is just a design study. And there are some harsh realities about rotary engine emissions and fuel economy standards that are difficult for modern piston engines to achieve without expensive componentry. Emissions and fuel economy are both bugbears of the rotary, in case you've forgotten. And that explains Mazda's interest in running rotaries on hydrogen, but down that road lie infrastructure challenges as daunting as making a gasoline-powered rotary burn as clean as one of Mazda's Skyactiv piston engines. All this is meant to put Mazda's recent comments to Top Gear in context. Mazda's design director, Kevin Rice, spoke to TG at the Concorso d'Eleganza Villa D'Este, and was waving Mazda's rotary flag quite enthusiastically. "In the back rooms at Mazda, we're still developing it," Rice said, "and when the world's ready to buy another rotary, we'll be ready to provide it." I'd like that to be a comforting statement, but given the realities of fuel economy and emissions regulations and Mazda's position in the market, it seems like a hollow platitude. "When the world's ready" is just another way of saying "when we solve the fundamental issues with this engine layout, and there's an unambiguous market study that shows we can build these cars and make a profit, we'll consider it." That seems like a lot of "ifs". Perhaps Mazda does have a clean-burning, efficient, cheap-to-produce rotary running on an engine dyno in Hiroshima, and it's prepping an RX-9 for the next auto show.

Mazda CX-3 almost ready for LA Show

The Mazda CX-3 is just days away from its unveiling at the 2014 Los Angeles Auto Show, but elsewhere in the world, the Japanese brand still has the compact crossover disguised for testing. These spy shots aren't too camouflaged though, and when combined with the previous teaser image, they give a pretty clear idea what the new model will look like.
The grille here is well covered, but the photo from the front reveals the similarities to the design sketch. The rear shows a similar horizontally oriented design as the Mazda2, which the CUV is based on. However, the dipping sides around the B-pillar from the teaser don't appear to be on this tester. Even with all the swirls, the vehicle looks fairly attractive.
Mazda is doing a fantastic job of keeping mechanical details about the CX-3 a secret. It's not yet known whether the model is front-wheel-drive only or if all-wheel drive is also an option. The crossover also likely shares the Mazda2's engine, which isn't revealed for North America, yet. The diminutive CUV will compete with a huge crop of new classmates, including the Fiat 500X, Jeep Renegade, Chevrolet Trax and Honda HR-V. Check out the gallery for the latest glimpses of this Japanese CUV just days ahead of its full debut.

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.