Quattroporte*18,000 Carfax Cert Miles*loaded*$120k New*we Finance/trade*fla on 2040-cars

Auto blog

Maserati planning second smaller SUV?

Maserati's product plans have taken a few wild turns, but as we get closer to production dates for the long-awaited offerings things are getting a wee bit clearer. The the sixth-generation Maserati Quattroporte is here, and a quick recap according to a report in Car and Driver has the smaller Ghibli sedan on Chrysler's LX/LY platform next, then the next-generation GranTurismo coupe and cabrio on a Maserati platform, then the Kubang SUV concept (pictured) that, for production, will become the larger Jeep-Cherokee-based Levante SUV.
All of which gets us to 2015. That same year, according to the report, the Levante will get a brother: a smaller SUV or crossover, perhaps sized like the Kubang concept, to challenge the Audi Q5 and the Porsche Macan. It is predicted to use the Compact US Wide platform, built for front-wheel and all-wheel-drive vehicles, that supports the Dodge Dart and 2014 Alfa Romeo Giulia. In addition to giving the premium brand a competitor in what is a very popular segment, a Maserati move slightly downmarket can help fill a gap while Fiat brass figures out what to do with Lancia.

Maserati Project24 is a custom, limited-edition, track-day special

Maserati joins the parade of limited-run, track-only cars designed to a set of specs instead of a set of established racing regulations. The entry is known by the codename Project24 at the moment, and Maserati says it will build just 62 examples. We don't know the significance of 24 nor of the production run. When the automaker launched the MC20, it said it planned to get return to heritage values founded at Formula 1 and sports car tracks around the world. While we wait on an MC20 developed for FIA GT racing, Project24 will be automaker's second outlet for racing aspirations, the Italians planning on entering Formula E next season. It's possible the Project24 is an offshoot of Maserati's reportedly dead GT3 program for the MC20. In December 2020, Daily Sports Car reported that a GT3 challenger "was said to be under development" when Maserati debuted the MC20, but perhaps due to ramifications of Covid, the circuit version was "shelved for the time being." The automaker hasn't divulged performance targets for the Project24, only a weight target: Below 1,250 kilograms, or 2,756 pounds. If achieved, the racer would be 552 pounds less than Maserati's claimed weight for the MC20. Part of the weight loss comes courtesy of carbon fiber bodywork that's two inches wider than on the MC20, Lexan windows, and making the passenger's seat optional. The gains should be felt everywhere around a track, especially because Project24's 3.0-liter V6 engine sports a larger pair of turbos that boost output by 119 horsepower, to 740 hp. The road car's eight-speed automatic is replaced by a six-speed sequential auto with paddle shifters, from there sending power to the rear wheels through a mechanical limited slip differential instead of the electric LSD in the MC20. Brembo CCMR racing brakes hang off a double wishbone suspension with anti-roll bars front and rear and adjustable dampers, just behind custom, forged 18-spoke center lock wheels on racing slicks. An adjustable front splitter and rear wing fine tune aero performance, on-board air jacks help pit crews put in the best performance.   The cabin offers an adjustable, multifunction carbon fiber steering wheel and pedal box. The wheel contains a digital display working alongside a dash and data acquisition system, but a driving performance optimization display is extra.

Junkyard Gem: 1989 Chrysler TC by Maserati

Lee Iacocca's friendship with Alejandro de Tomaso went way back, and it led to the Ford-powered De Tomaso Pantera being born in 1971 (when Iacocca was running Ford). After Iacocca moved over to head Chrysler in 1978, he began working with de Tomaso (who owned Maserati by that point) to develop a sports coupe based on the Chrysler-salvation K-Car platform. It took quite a while, but eventually that car became reality: the Chrysler TC by Maserati (officially known as Chrysler's TC by Maserati). Some 7,300 were built through 1991, and I've found one of them in a Denver-area car graveyard. I've managed to document four of these cars in their final parking spots prior to this one, in wrecking yards in Colorado, California, and Wisconsin. The Chrysler's TC by Maserati does have a devoted following, but they can't save 'em all. The TC really was assembled by Maserati in Italy, but the underlying chassis was taken from the Dodge Daytona. The body bore a strong resemblance to that of the Chrysler LeBaron GTC, which was unfortunate considering the price difference between the two cars: the MSRP on the 1989 TC was $33,000, while the LeBaron GTC cost $17,435 (that's about $80,880 and $42,730 in 2022 dollars). The TC had three different engines driving the front wheels over its short lifetime: two varieties of turbocharged Chrysler 2.2 four-cylinder (one with 160 horsepower and one with a Cosworth cylinder head with 200 horsepower) and that good old workhorse of a Mitsubishi V6: the 6G72, with 141 horses. This car has the 160hp 2.2. The Cosworth-headed cars (500 were built) got a five-speed manual transmission, but the other 6,800 TCs got a Chrysler slushbox of either three or four speeds (this one is a three-speed). There was a lot of snobbish disapproval of the TC by the automotive press, but just look at that interior! Even the most over-the-top LeBaron never got this level of swank inside.  Every time I write about one of these cars, I hear that the factory hardtop roof is worth fantastic money… but four out of the five examples I've found in junkyards had the hardtop, and I think every single one went to the crusher with its car. How many miles? Not many! Maybe the speedometer cable broke in 1995. The radio and HVAC controls are straight LeBaron, but the wood and leather are the real thing.