Front&rear Sensors Red Calipers Paddles Racing Pedals 20 In Mercury Trident Rims on 2040-cars

Auto blog

Fiat Chrysler's Q3 profit boosted by strong North American earnings

MILAN, Italy — Fiat Chrysler Automobiles (FCA) reported a 17 percent jump in third-quarter adjusted operating profit on Tuesday, helped by a strong performance in its key North American market and improving operations in Europe and Latin America. The world's seventh-largest carmaker still makes the lion's share of its profits in North America, so improving, or at least maintaining, its margins there is a key focus. The carmaker reported an 8 percent adjusted operating profit margin in the region, up from 7.6 percent a year ago, despite a drop in sales and shipments. "FCA's profitability in North America remained strong in the quarter despite a weakening market there," a Milan-based analyst said. FCA's profitability compares with an 8.3 percent North America margin reached in the quarter by bigger U.S. rival GM , showing CEO Sergio Marchionne making progress towards his goal of closing the margin gap with GM and the company's other U.S. rival, Ford, by 2018. The company's confirmation of its full-year outlook also pushed shares higher, a trader added. The stock was up 2.8 percent by 1129 GMT, outperforming a 1 percent rise in the European auto index. FCA has been retooling some U.S. factories to boost output of sport-utility vehicles (SUVs) and trucks while ending production of some unprofitable sedans to strengthen profitability as the U.S. car market comes off its peak. The company said a drop in North America shipments due to lower fleet sales and discontinued models was partially offset by higher deliveries of Ram trucks and two models from the Alfa Romeo stable: the Stelvio sport utility vehicle and Giulia sedan. Profitability also improved in Europe, helped by sales of the Stelvio and the new Jeep Compass, and Latin America, while margins at Maserati remained strong at 13.8 percent due to strong demand for its first SUV, the Levante. In a later conference call, investors are looking for hints on the new strategy to 2022 which the company promised to unveil early next year. Chief Executive Sergio Marchionne said earlier this year that FCA would streamline its portfolio and that components businesses, including Magneti Marelli, would be separated from the group, possibly via a spin-off. While FCA confirmed its targets this year, doubts remain about its exposure to a weakening U.S. market, recall costs and potential fines over emissions after it was targeted by European and U.S.

2014 Maserati Ghibli snarls in Shanghai

Big things are happening at Maserati, where the automaker is looking to increase its sales to 50,000 units annually. In addition to the revised Quattroporte that we saw at the Detroit Auto Show earlier this year, Maserati has launched the all-new Ghibli here in Shanghai - a smaller, more driver-focused model that will take on the likes of the Audi A6, BMW 5 Series and Mercedes-Benz E-Class.
At launch, the Ghibli will be offered with three six-cylinder engines, two gas and one diesel. The base engine is a turbocharged 3.0-liter V6 with 330 horsepower and 368 pound-feet of torque, good for a 0-62 time of 5.6 seconds. The more powerful Ghibli S, however, comes with a twin-turbocharged version of this engine, good for 410 hp and 406 lb-ft, reducing that 0-62 time to just five seconds flat. On the diesel end, the Ghibli will offer a 3.0-liter diesel V6 with 275 hp and 443 lb-ft of twist, able to do that same 62-mile-per-hour run in a still impressive 6.3 seconds. The more powerful Ghibli S will also be available with Maserati's new Q4 all-wheel-drive system, though we're told that this feature cannot be had on right-hand-drive versions.
As for what we can see here in Shanghai, the Ghibli looks pretty darn good, though that front fascia reminds us an awful lot of the BMW 3 Series. (Seriously, just picture the Bimmer with a more gaping grille opening.) Maserati will offer the Ghibli with standard 18-inch wheels, though 19s, 20s, and even 21s will be available as optional extras.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.