Awd Navigation Backup Camera Leather Sunroof Heated Seats on 2040-cars

Auto blog

Lincoln releases power and economy ratings for 2015 MKC with 2.3L EcoBoost

As the first 2015 MKC crossovers slip into dealerships, Lincoln has confirmed power and fuel economy ratings for the compact crossover's optional 2.3-liter Ecoboost four-cylinder engine.
The new range-topping powerplant, thus far otherwise unavailable in the Blue Oval kingdom, will net a healthy 285 horsepower at 5,500 rpm and 305 pound-feet of torque from 2,750 revs. Those figures represent gains of 10 hp and 5 lb-ft over earlier estimates, putting the handsome new compact CUV in the hunt with up-engined rivals from Audi and BMW. (A variant of the 2.3L will shortly find its way into the engine bay of the 2015 Ford Mustang, albeit with a number of key changes, including north-south orientation.)
In the MKC, the new engine will net 18 miles per gallon in the city and 26 on the highway with standard all-wheel drive, meaning it only loses a single mile per gallon in the city cycle versus the 240-hp, 270-lb-ft 2.0L EcoBoost model when fitted with all-wheel drive. Both engines rely on the same six-speed SelectShift automatic transmission.

Mustang parts under the new Lincoln Aviator mean good things for Ford

NEW YORK — As we mentioned last night, underneath the new Lincoln Aviator "concept" there appears to be an independent rear suspension lifted right from the Ford Mustang parts bin. And while it's pretty cool on its face that Mustang rear-drive platform bits are being reused in the broader Ford universe, what this means for the next Explorer could be really cool. A quick caveat: The Aviator here in New York is very close to the production version, but it's not technically a production car. It looks hand-built, with temporary exhaust and some show-car touches. The suspension underneath looks exactly like a Mustang's, but the actual production Aviator will almost certainly use beefier components with the same basic design and geometry, since the Aviator will be much heavier than the smaller Mustang. That being said, we're fairly confident that even at this early stage, the Mustang-derived suspension seen in New York is a preview of what'll be under the production Aviator. Furthermore, Ford won't say it, but based on what we're seeing on Aviator, it's a safe bet that Ford will utilize the Aviator platform for the next Explorer. That would enable the economies of scale necessary to produce a brand new rear-drive-based SUV platform in the first place. It also means that the Explorer should be available without AWD — and given the stable of powerful EcoBoost engines, and the competent 10-speed automatic in the parts bin, a rear-drive Explorer has a shot at being a decent driver. Aviator wouldn't go rear-drive-based if driving dynamics weren't important; Explorer should inherit these priorities. More evidence: The Explorer spy shots we saw back in February sure share the Aviator's general proportions. Even back then, before Aviator was revealed, we were hypothesizing that an EcoBoost 3.5-liter-powered version could boast as much as 400 horsepower, if the Expedition's tune were adopted. Suddenly, the Explorer seems very interesting. So, an EcoBoost, rear-drive Explorer sure sounds like something Ford Performance would be interested in, right? We knew an Explorer ST is coming, but with 365-400 horsepower potential and a chassis designed with dynamics in mind, it doesn't seem like as much of a stretch as the Edge ST. And a performance-oriented AWD system is a possibility, too. That's an area where Ford has been gathering experience at a rapid pace. What do we not expect from a new Explorer? A V8.

Ford cuts production at 5 plants, has big backload of cars including Mustang

DETROIT — Ford said on Tuesday it plans to idle five North American vehicle assembly plants for a total of 10 weeks to reduce inventories of slow-selling models. The plants affected include three assembly plants in the United States and two in Mexico, the company said in a statement. The vehicle models include the Ford Fusion and Lincoln MKZ midsize sedans, the Ford Focus compact car, the Lincoln Continental and Ford Mustang, Ford Fiesta and the Ford Transit van. Ford said the Cuautitlan assembly plant that builds the Fiesta would be idled for three weeks. The Hermosillo, Mexico plant that builds the Fusion and MKZ and the Flat Rock, Michigan, factory that assembles Continentals and Mustangs will be idled for two weeks each. The Michigan Assembly plant that builds the Focus will be idled for one week, and the Kansas City assembly line that builds Transit vans will be down for two weeks. Ford did not give dates for the temporary shutdowns. The factories involved employ more than 15,000 people, according to Ford's website. The company did not say how many of those workers would face temporary layoffs. As of Sept. 1, Ford had 111 days' worth of unsold Mustangs, 87 days' supply of Fusions, and a 103 days' supply of Transit vans, according to Automotive News. Dealers had enough unsold Lincoln Continentals to last 162 days. Automakers aim for 65 to 70 days of inventory of most models. Ford and rival General Motors have wrestled most of this year to rein in high inventories of passenger cars as consumers have shifted to buying pickup trucks and sport utility vehicles. Production cuts slice into revenue, but also could help the automakers avoid deeper price cuts on vehicles they can sell. Reporting by Joe WhiteRelated Video: Image Credit: Reuters Plants/Manufacturing Ford Lincoln Convertible Coupe Minivan/Van Sedan ford transit inventory flat rock kansas city assembly plant hermosillo