Lexus Rx 330 on 2040-cars

Auto blog

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Recharge Wrap-up: Tesla breaks dyno on video, Lexus trademarks 'LS 500h'

A video shows a Tesla Model S P85D breaking a dyno during a test. Starting at a slow roll, the instant torque under full power snapped a belt on the dynamometer. Before it broke, the dyno measured over 700 pound-feet of torque from the all-wheel-drive Tesla. A previous dyno run saw the car reach its 155-mph top speed and a peak 435 horsepower. See the video above, and read more at DragTimes. Lexus has filed a trademark for "LS 500h" in Europe. This calls for some speculation as to what this means for an upcoming model. It could be that Lexus plans to release the LS with a new powertrain, perhaps a 4.0-liter engine with a hybrid system. Maybe it will use the 3.5-liter V-6 with a more powerful hybrid system. The LS 600h could simply be getting a new name. Or, we might not see the LS 500h badge used at all in the near future. Note that Lexus trademarked LC 500 and LC 500h in Canada last year, and we've seen no such cars yet. Read more at Hybrid Cars. Ethanol producers have strong words in response to the American Petroleum Institute's claims for demand for ethanol-free gasoline. The API and National Marine Manufacturers Association have urged the EPA to consider marine and small engine demand for E0 gasoline when setting Renewable Fuel Standard volume requirements. Big Oil is using a "false narrative to discourage the use of a cleaner, less expensive, homegrown renewable fuel," according to Growth Energy CEO Tom Buis. Buis says ethanol doesn't cause problems in marine and small engines, a statement backed by the Outdoor Power Equipment Institute. "What probably does concern boaters is the amount of time they spend dry docked as a result of oil spills, like the one that dumped 21,000 gallons of oil along four miles of coastline in Santa Barbara, California," says Buis. Read more from Ethanol Producer Magazine. Related Gallery 2013 Lexus LS 600h L: Quick Spin View 13 Photos News Source: DragTimes, YouTube: DragTimes, Hybrid Cars, Ethanol Producer Magazine Green Lexus Tesla Alternative Fuels Ethanol Electric Hybrid Videos recharge wrapup

Lexus recalling 3,000 NX 200t CUVs for faulty brake system part

Lexus is recalling about 3,000 examples of the 2015 NX 200t in the US because of possible damage to the ABS actuator during assembly. On vehicles with the faulty part, the anti-lock brakes, traction control and stability control might not function properly. If the ABS is activated while driving, it could cause "a loss of vehicle stability," according to the company. No crashes, injuries, or fatalities have been reported. According to company spokesperson Cindy Knight to Autoblog, affected owners will receive notification by mail of this problem in early July. Dealers will inspect the actuator on the NX200t and will replace it, if necessary. Related Video: LEXUS RECALLS CERTAIN MODEL YEAR 2015 NX VEHICLES TORRANCE, Calif., May 27, 2015 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 3,000 model year 2015 Lexus NX 200t vehicles. The involved vehicles are equipped with an Anti-Lock Braking system (ABS), Traction Control System (TRAC), and Vehicle Stability Control System (VSC) which are controlled by the ABS actuator. There is a possibility that a component inside the actuator could be damaged during assembly and later not operate properly. Under some driving conditions, if the ABS is activated, this could cause a loss of vehicle stability, which can increase the risk of a crash. To date, Toyota is not aware of any crashes, injuries or fatalities caused by this condition. All known owners of the involved Lexus vehicles will be notified by first class mail. Lexus dealers will inspect the ABS actuator and if necessary replace it with a new one. Information about automotive recalls, including but not limited to the list of involved vehicles, is subject to change over time. For the most up-do-date recall information, customers should contact Toyota Customer Service at 1-800-331-4331, or Lexus Customer Service at 1-800-255-3987. Customers can also access current information on open safety recalls for their vehicles by visiting www.toyota.com/recall or http://www.safercar.gov/ and entering their Vehicle Identification Number (VIN). ###