2007 4dr Sdn Used 4.6l V8 32v Automatic Rwd Sedan Premium on 2040-cars

Auto blog

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

Lexus planning a hydrogen fuel-cell LS by 2017

Toyota's Fuel Cell System will certainly migrate to other vehicles in the carmaker's lineup, but Australian car site Motoring reports that one of the models at the head of the queue is the Lexus LS. According to its sources, the executive barge powered by hydrogen will be released by 2017 and take the top spot in the range, rolling in above the LS Hybrid. We're told that Toyota engineers will find a way to slide two hydrogen tanks into its bodywork with the same general setup as on the Mirai – one under the rear seats and another under the rear parcel shelf. The 150-kW fuel cell stack will be placed under the front seats. Motoring says the resulting sedan and its 220-kW electric motor would come in "at around 2,100 kg," which is 4,620 pounds; that's a ginormous 539 pounds less than the listed curb weight of the current LS Hybrid, and 387 pounds more than the standard LS. Assuming all goes as planned, it would have a range of roughly 238 miles, a few dozens less than the Mirai's range of about 300 miles. It would look slightly different, too, the front end getting larger intakes to cool the power unit. It wouldn't surprise us if Lexus does have a hydrogen LS planned – it would be a statement car, and the company likes making statements, even if few heed them; it has stuck with its LS 600h for the past seven years, yet of the 7,539 LS models sold through the end of November this year, only 61 of them were hybrids. The timing would be intriguing, however; by the time the LS hybrid came out, Lexus had already worked over its filet-and-potatoes models. And if the hydrogen version is going to come in above the $120,440 hybrid, well, that will be a statement indeed.

Next Lexus RX previewed with JDM Toyota Harrier?

Japanese site CarWatch has revealed images of the next-generation Toyota Harrier, known to US and European buyers as the Lexus RX. The new model features a considerably more aggressive fascia in keeping with some of the latest Lexus design trends, while the back features a pair of wide, wraparound taillights.
The profile features a revised greenhouse, with a rather complex rear window treatment, while a subtle character line connects the front and rear taillights. According to the badging, the model shown features a hybrid powertrain, although there's little information on which engine is being used. We'd wager it's an evolution of the same 3.5-liter V6 hybrid found in the current RX450h.
This early look doesn't have a great deal of other info, and there are no images of the interior. We're not yet clear on how closely the North American RX will adhere to the Harrier seen here, but historically the two models have been quite close. That said, we'd expect a more prominent 'spindle' grille on the Lexus version than the baleen strainer on the vehicle shown here.