2008 Lexus Isf Is-f Sedan 416hp Rocket 19" Is F Forged Rims Upgrades Cln Carfax on 2040-cars

Auto blog

Toyota recalls 337,000 RAV4s and HS250h models for tie rod failure

UPDATE: The post has been updated with additional information from NHTSA. The Basics: Toyota is recalling 337,000 2006-2011 model year Toyota RAV4 crossovers built between October 31, 2005 and September 7, 2010 as well as 2010 model year Lexus HS250h cars built between July 6, 2009 and August 26, 2010. The Problem: When either an affected RAV4 or HS250h is given an alignment and the tie rod adjustment nut on the rear control arm isn't tightened properly, the threads on the tie rod can start to rust. If this happens, the nut may break off and throw off the alignment drastically and suddenly. This isn't a case of the car simply pulling to one side, either. This would seriously upset the balance of the car and could cause the driver to lose control and crash. This is also the third time these vehicles have been recalled for the same issue. Injuries/Deaths: It's unknown if this control arm issue has resulted in any injuries or deaths. Autoblog reached out to Toyota for more information, but a company representative told us that the company isn't able to discuss injuries or deaths caused by this issue (if any) at this time. Based on information from NHTSA documents, it does not appear that any crashes, injuries or deaths have been attributed to the defect addressed in the current recall. The Fix: The dealer will completely replace the rear suspension assemblies at no cost to the owner. The tie rods and nuts will also be coated in epoxy to prevent future rusting from occurring. According to Car and Driver, the previous recalls involved tightening nuts, coating decent tie rods in epoxy and completely replacing rusted ones. The car magazine reports that further complaints were filed and the company is now replacing all components regardless of condition. If you own one: Toyota will notify owners of affected cars by mail. Owners can also check whether their cars are affected by entering the VIN at safercar.gov/vin. Owners with questions can also reach Toyota customer service at 1-800-331-4331 or Lexus customer service at 1-800-255-3987. Related Video: Featured Gallery 2012 Toyota RAV4 View 16 Photos News Source: Car and Driver, Toyota, National Highway Traffic Safety AdministrationImage Credit: Toyota Recalls Lexus Toyota Safety lexus hs 250h lexus hs250h

Lexus flagship spotted testing in the desert

Most of the Lexus line-up has been updated with the company's unique design language. Whether you love it or hate it, most of the company's cars are impossible to confuse for something else. But during this time of transformation, the flagship LS sedan has lingered with a very mild, sedate shape. These spy photos show the LS has gone under the knife. That being said, we can't really say how different the LS is going to look for sure because Lexus has employed some impressive camouflage. If we didn't know better we'd say it looks like the LS is going retro with round reflector headlights and some rear tailfins. But we do know better, so don't look for those features to make it to the production model. What we can make out is the lower half of the Lexus "spindle" grille. The camouflage wrapping is pressed up against a trapezoidal shape at the front reminiscent of what we've seen on other Lexus models. It looks like a large version of it as well. This Lexus seems to still be quite long, and based on where the rear passenger is in the photos, it still seems to have loads of space for rear passengers. It's difficult to tell if this is a long wheelbase model or a standard one, but if it is long wheelbase, it's proportioned quite nicely. It looks like there will be quite a large C-pillar on this LS too. Our spy photographer expects this car to be revealed next year as a 2018 model available with a V8 and possibly a hydrogen powertrain. So if you want one of the last low-key LS models, you'll want to get the current version because its days are numbered. Related Video:

Lexus LC 500 gets customized at SEMA before it even goes on sale

We still have to wait until next year for Lexus to start delivering the gorgeous new LC 500 to dealer showrooms, but that little fact didn't stop Lexus from letting people modify it for SEMA. The first LC coupe to get the custom treatment is this bright yellow example modified by Gordon Ting and Beyond Marketing. Prospective LC 500 buyers who want to modify their rides won't have to wait long do start adding these parts to their cars. Because Lexus let these companies develop parts this far in advance, the parts should be available around the same time as the car. On the outside, the LC 500 gets a new Artisan Spirit body kit that consists of a front diffuser, fender flares, side skirts, rear diffuser and rear spoiler. The car also has a lower stance thanks to a kit developed by KW Suspension. It features adjustable springs for ride height, plus a hydraulic lift system to keep the custom body work from scraping. The Lexus rolls on HRE P101 wheels that are stopped by Brembo brakes. The other highlight of this custom Lexus is under the hood. The LC 500 comes with a 471-horsepower 5.0-liter V8 that's also found in the RC F and GS F. However, the engine development team at Hard Media, Inc. and D SPORT Magazine had the engine rebuilt with CP pistons and Carrillo connecting rods, and it was given new cylinder sleeves from LA Sleeves to increase bore-size. The end result is a 5.6-liter engine making 525 horsepower. According to Lexus, 525 horsepower is far from the limit of this engine, saying that its capabilities could be, and in fact "have been more than doubled." If anyone at Lexus is reading this, we don't doubt the claim, but we'd also be more than happy to see this capability proven. Perhaps at next year's SEMA show? Related Video: Featured Gallery Customized Lexus LC 500: SEMA 2016 View 9 Photos Image Credit: Live photos copyright 2016 Drew Phillips / Autoblog Aftermarket SEMA Show Lexus Coupe Luxury lexus lc 500 SEMA 2016