Hse Luxury Pkg Fac Rear Dvd 4-zone Climate Control Navigation Camera Sat Ipod on 2040-cars

Auto blog

NHTSA is investigating FCA shifters for roll-away accidents again, this time the rotary units

It seems FCA's shifter troubles aren't over yet. Now, just a few months after issuing a recall to resolve user-related issues with its monostable shifters, the company is again under investigation by NHTSA. The issue is related to the potential for cars to roll away when the rotary-style shifter is not properly placed in park. Two FCA models are the subject of this investigation: the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango. NHTSA estimates about 1,000,000 vehicles would be affected if a recall is issued. The investigation was started following 43 complaints of vehicles rolling away while supposedly being in "park." Among the complaints were reports of 25 crashes and 9 injuries. NHTSA does point out that in every incident, the parking brake was not engaged. A representative from FCA also gave us an official statement regarding the investigation: "FCA US is cooperating fully with NHTSA's investigation, the scope of which is limited. Other vehicles equipped with rotary shifters are not included. In accordance with prudent practice, the Company joins NHTSA in urging all drivers to use their vehicles' parking brakes." View 35 Photos As mentioned above, other Chrysler products with rotary shifters, such as the Pacifica minivan and 200 sedan, are not involved in this investigation. One of the key differences, as the representative told us, is that these vehicles have electronic parking brakes that automatically engage if the driver does not select park and then opens the door with the seatbelt unbuckled. The Ram 1500 and Durango feature mechanical, manually operated parking brakes and therefore cannot activate the brake automatically. Because this is currently an investigation, an exact cause for the incidents has yet to be determined, and none of the vehicles have been recalled. It's possible there could be a mechanical defect. However, the issue could be a confusing interface causing user error, as was the case with FCA's monostable shifters, where drivers think they've put the car in park but actually haven't. Something that indicates it could be a case of confused users is that NHTSA also opened an investigation into 2012–2014 Jaguar XF and Land Rover Range Rover Evoques for similar issues. Both vehicles use a rotary shifter and have had roll-away complaints levied as well. Even if it is a case of user error, FCA and Jaguar Land Rover may still have to recall their vehicles.

Jaguar Land Rover building new Special Vehicle Operations facility

It's only been a couple of months since Jaguar Land Rover announced the formation of its new Special Operations division, and we've already seen a number of vehicles to come out of it. But now the British automaker has announced a new facility that will house its elite skunkworks department.
Set to be built at Prologis Park in Ryton, England, on the outskirts of Coventry, the new Special Vehicle Operations Technical Centre will encompass dedicated production lines, F1-style flexible workshops, a dedicated paint studio and VIP suite for commissioning bespoke projects. JLR will spend some $33 million on the facility that will be home to 150 specialists - 100 of them being new hires.
The first project which the Special Operations division is working on is the F-Type Project 7, but we've already seen more projects in the pipeline - including the upcoming Range Rover Sport SVR - and you can bet there'll be more. The revival of the Lightweight E-Type also falls under Special Operations, but is undertaken by the Jaguar Heritage department located nearby at Browns Lane.

Jaguar Land Rover exploring 3D HUD and infotainment projections

With its most recent technology research, Jaguar Land Rover (JLR) is exploring the use of 3D projections for a world before and/or after autonomous vehicles come to fruition. In collaboration with the United Kingdom's University of Cambridge, JLR has developed concepts for a 3D head-up display that shows information on the road ahead and a system that projects personalized 3D infotainment for vehicle passengers.  As of right now, hundreds of production vehicles are equipped with two-dimensional head-up displays, some color, others black and white. Using various techniques and different technologies, manufacturers display information in a flat image in front of a driver. Some might find it distracting or unhelpful to have this in the driver's line of sight, and JLR might have found a solution. Rather than wedge the information in between the person and the view ahead, a 3D system that uses augmented reality could display the info onto the road in front of the driver. JLR thinks the system could project navigation directions, safety alerts such as lane departure, hazard detection or other bits typically found in a car's infotainment or instrument cluster. Some might find this to be even more distracting that 2D head-up displays, but to each his or her own. While the 3D head-up display is something that could be used right now, if it were released and passed legal, part two of JLR's 3D technology research is imagined for a life where truly autonomous vehicles are skating across the country. Using head- and eye-tracking technology, the system could lock into the position of numerous people in a vehicle and give each of them a personalized 3D projection "screen." This could be used to track a trip, look up points of interest, or even watch movies. JLR points out this could be used during ride-sharing without bothering others in the vehicle. The work with the Center for Advanced Photonics and Electronics at Cambridge is still in development for now, but it's only a matter of time before 3D tech makes it into cars in some degree.