2013 Land Rover Range Rover S/c 510hp Autobiography/lumma Design Clr R, Rare!!! on 2040-cars

Auto blog

NHTSA is investigating FCA shifters for roll-away accidents again, this time the rotary units

It seems FCA's shifter troubles aren't over yet. Now, just a few months after issuing a recall to resolve user-related issues with its monostable shifters, the company is again under investigation by NHTSA. The issue is related to the potential for cars to roll away when the rotary-style shifter is not properly placed in park. Two FCA models are the subject of this investigation: the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango. NHTSA estimates about 1,000,000 vehicles would be affected if a recall is issued. The investigation was started following 43 complaints of vehicles rolling away while supposedly being in "park." Among the complaints were reports of 25 crashes and 9 injuries. NHTSA does point out that in every incident, the parking brake was not engaged. A representative from FCA also gave us an official statement regarding the investigation: "FCA US is cooperating fully with NHTSA's investigation, the scope of which is limited. Other vehicles equipped with rotary shifters are not included. In accordance with prudent practice, the Company joins NHTSA in urging all drivers to use their vehicles' parking brakes." View 35 Photos As mentioned above, other Chrysler products with rotary shifters, such as the Pacifica minivan and 200 sedan, are not involved in this investigation. One of the key differences, as the representative told us, is that these vehicles have electronic parking brakes that automatically engage if the driver does not select park and then opens the door with the seatbelt unbuckled. The Ram 1500 and Durango feature mechanical, manually operated parking brakes and therefore cannot activate the brake automatically. Because this is currently an investigation, an exact cause for the incidents has yet to be determined, and none of the vehicles have been recalled. It's possible there could be a mechanical defect. However, the issue could be a confusing interface causing user error, as was the case with FCA's monostable shifters, where drivers think they've put the car in park but actually haven't. Something that indicates it could be a case of confused users is that NHTSA also opened an investigation into 2012–2014 Jaguar XF and Land Rover Range Rover Evoques for similar issues. Both vehicles use a rotary shifter and have had roll-away complaints levied as well. Even if it is a case of user error, FCA and Jaguar Land Rover may still have to recall their vehicles.

Jaguar Land Rover moves closer to building Slovakia plant

Jaguar Land Rover has announced its intention to build a new assembly plant in Slovakia. Though it has yet to make the final decision, the British automaker has signed a Letter of Intent with the Slovakian government. Its next step is to launch a feasibility study before committing. If the company does go ahead with plans, it wouldn't be the first automaker – or even the first European luxury automaker for that matter – to start producing in Slovakia. Nor would it be the first Jaguar Land Rover plant outside the UK, either. The Volkswagen Group, PSA Peugeot Citroen, and Kia all manufacture in the Central European country. VW's Bratislava plant in particular handles production of the Touareg, Audi Q7, and Porsche Cayenne. In the past few years, JLR has expanded its production capacity to new locations outside of the UK. It has a new factory in China, one under construction in Brazil, and has been manufacturing in India – home country of its parent company Tata – since 2011. It recently announced a manufacturing contract with Magna Steyr in Austria, and is investing in its facilities back home as well. Though yet to be finalized, the prospect of manufacturing in Slovakia has proven more favorable to JLR than other locations in Europe or in the United States or Mexico – all possibilities that the company says it looked into. It has yet to reveal just what it would produce there, saying only that "the plant would manufacture a range of aluminium Jaguar Land Rover vehicles," that the plant would be earmarked to come online in 2018 and eventually ramp up production to 300,000 vehicles. The prevailing wisdom would seem to indicate, however, that the site is being considered for the next-generation Land Rover Defender. Related Video: JAGUAR LAND ROVER UNVEILS NEXT STAGE OF GLOBAL EXPANSION PLANS - Letter of Intent signed for potential new plant in the Slovak Republic - Indicates the next stage of the Company's expansion plans to support a competitive global business in the future - Jaguar Land Rover's global expansion underpins long-term investment in new vehicles and technologies in the UK Coventry, UK – Jaguar Land Rover has signed a Letter of Intent with the Government of the Slovak Republic for the potential development of a new manufacturing plant in the city of Nitra in western Slovakia. With its established premium automotive industry, Slovakia is an attractive possible development opportunity.

Jaguar Land Rover in talks for Southern US factory

Jaguar Land Rover is getting serious about global expansion, and that means it can't only build its vehicles in the UK anymore. The British automaker is cutting the ribbon at its new plant in China tomorrow, marking the opening of its first factory outside the UK. In 2016, it will open another factory in Brazil. But the latest intel has it that JLR is looking into a US factory, as well.
The report, which comes to us from the Sunday Times by way of Automotive News Europe, indicates that the company is evaluating locations for a North American factory, with options centering around Southern right-to-work states like South Carolina, where BMW operates its plant in Spartanburg and a wide array of other automotive operations are based as well. The JLR plant would reportedly ramp up to a capacity of 200,000 units per year.
In related news, while that new plant JLR is inaugurating in Changshu, China, is initially slated to produce the Range Rover Evoque, it is also expected to start building the new Discovery Sport as well - just like the Halewood plant in the UK that has handled Evoque assembly from the start and which just built its first Discovery Sport, as well.