2013 Land Rover Range Rover S/c 510hp Autobiography/lumma Design Clr R, Rare!!! on 2040-cars

Auto blog

Jaguar Land Rover exploring 3D HUD and infotainment projections

With its most recent technology research, Jaguar Land Rover (JLR) is exploring the use of 3D projections for a world before and/or after autonomous vehicles come to fruition. In collaboration with the United Kingdom's University of Cambridge, JLR has developed concepts for a 3D head-up display that shows information on the road ahead and a system that projects personalized 3D infotainment for vehicle passengers.  As of right now, hundreds of production vehicles are equipped with two-dimensional head-up displays, some color, others black and white. Using various techniques and different technologies, manufacturers display information in a flat image in front of a driver. Some might find it distracting or unhelpful to have this in the driver's line of sight, and JLR might have found a solution. Rather than wedge the information in between the person and the view ahead, a 3D system that uses augmented reality could display the info onto the road in front of the driver. JLR thinks the system could project navigation directions, safety alerts such as lane departure, hazard detection or other bits typically found in a car's infotainment or instrument cluster. Some might find this to be even more distracting that 2D head-up displays, but to each his or her own. While the 3D head-up display is something that could be used right now, if it were released and passed legal, part two of JLR's 3D technology research is imagined for a life where truly autonomous vehicles are skating across the country. Using head- and eye-tracking technology, the system could lock into the position of numerous people in a vehicle and give each of them a personalized 3D projection "screen." This could be used to track a trip, look up points of interest, or even watch movies. JLR points out this could be used during ride-sharing without bothering others in the vehicle. The work with the Center for Advanced Photonics and Electronics at Cambridge is still in development for now, but it's only a matter of time before 3D tech makes it into cars in some degree.

Jaguar Land Rover reveals EV concepts, details green strategy

While it offers diesel models and even a couple hybrids, Jaguar Land Rover isn't quite as fleshed out on alternative powertrains as its luxurious German rivals. That should change pretty soon. JLR revealed three concepts at the CENEX Low Carbon Vehicle event in Millbrook, England, today. The Concept_e "research demonstrators" all use a new electric drive module, an EV system that the Indian-owned, British-based outfit claims will double the power and torque of today' electric motors. JLR says these modular EDMs can be paired with any of the company's engines or transmissions to create either a mild hybrid, a plug-in hybrid, or a pure EV. So yeah, this is kind of a big deal. Arguably the most exciting offering is a one-of-a-kind research vehicle. Riding on JLR's aluminium aluminum architecture, it ties together two electric motors – an 85-kW unit with a single-speed trans on the front axle and a 145-kW rear motor that's been mated to a two-speed transmission – with a 70-kWh li-ion battery that's mounted in the underbody of the car. There's also the Concept_e MHEV. This is a Range Rover Evoque that's been fitted with a mild hybrid system. Just a refresher, but a mild hybrid is very different than what's found in either a Chevrolet Volt or Toyota Prius, as it uses the electric motor and battery pack to simply assist the internal combustion engine, rather than for an electric driving mode. Reflecting that use, this particular Evoque uses a 15-kilowatt electric motor and a 48-volt, lithium-ion battery pack alongside a 90-metric-horsepower diesel-powered prototype. Finally, we have a Range Rover Sport-based plug-in hybrid. This brute uses a 300-metric-horsepower prototype gas engine and an eight-speed automatic alongside a 150-kilowatt electric motor. Energy is stored in a trunk-mounted, 320-volt, li-ion battery back. Partially funded by the British government, the EDMs are the result of a 16.3-million-pound ($25-million) research-and-development program. They're built in house by JLR, but were developed alongside 12 partners. While these concepts are exciting, don't get your hopes up to see a plug-in Jaguar XF or an all-electric Discovery Sport in your local dealer any time soon. "This is a long-term Jaguar Land Rover research project exploring all aspects of future hybrid and battery electric vehicle technology," JLR research and design boss Dr. Wolfgang Epple said in the attached statement.

Rising aluminum costs cut into Ford's profit

When Ford reports fourth-quarter results on Wednesday afternoon, it is expected to fret that rising metals costs have cut into profits, even as rivals say they have the problem under control. Aluminum prices have risen 20 percent in the last year and nearly 11 percent since Dec. 11. Steel prices have risen just over 9 percent in the last year. Ford uses more aluminum in its vehicles than its rivals. Aluminum is lighter but far more expensive than steel, closing at $2,229 per tonne on Tuesday. U.S. steel futures closed at $677 per ton (0.91 metric tonnes). Republican U.S. President Donald Trump's administration is weighing whether to impose tariffs on imported steel and aluminum, which could push prices even higher. Ford gave a disappointing earnings estimate for 2017 and 2018 last week, saying the higher costs for steel, aluminum and other metals, as well as currency volatility, could cost the company $1.6 billion in 2018. Ford shares took a dive after the announcement. Ford Chief Financial Officer Bob Shanks told analysts at a conference in Detroit last week that while the company benefited from low commodity prices in 2016, rising steel prices were now the main cause of higher costs, followed by aluminum. Shanks said the automaker at times relies on foreign currencies as a "natural hedge" for some commodities but those are now going in the opposite direction, so they are not working. A Ford spokesman added that the automaker also uses a mix of contracts, hedges and indexed buying. Industry analysts point to the spike in aluminum versus steel prices as a plausible reason for Ford's problems, especially since it uses far more of the expensive metal than other major automakers. "When you look at Ford in the context of the other automakers, aluminum drives a lot of their volume and I think that is the cause" of their rising costs, said Jeff Schuster, senior vice president of forecasting at auto consultancy LMC Automotive. Other major automakers say rising commodity costs are not much of a problem. At last week's Detroit auto show, Fiat Chrysler Automobiles NV's Chief Executive Officer Sergio Marchionne reiterated its earnings guidance for 2018 and held forth on a number of topics, but did not mention metals prices. General Motors Co gave a well-received profit outlook last week and did not mention the subject. "We view changes in raw material costs as something that is manageable," a GM spokesman said in an email.