2014 Range Rover Sport 2014 Supercharged 5.0l V8 4x4 Nav Pano Blind 69k on 2040-cars

Auto blog

Check out King Charles III's $17.6 million car collection

King Charles III's coronation will take place in England on May 6, and being crowned a monarch comes with a long list of perks with four wheels. He will gain full access to the Royal Family's fleet of cars, which is valued at about GBP14 million (approximately $17.6 million). The two most expensive cars in the collection are nearly identical: they're a pair of Bentley State Limousine models (pictured) built for Queen Elizabeth II, King Charles III's mother, in 2002. Only two units were made, and they're both part of the Royal Family's fleet, so they're difficult to put a value on; it's not like one is going to end up listed on your favorite auction site anytime soon. British company Nationwide Vehicle Contracts, which compiled the list, estimates that each armored, 245-inch long sedan is worth at least GBP10,000,000 (roughly $12.6 million). Dropping below the eight-digit threshold, the second-most-valuable car in the Royal Family's fleet isn't really a car. It's the Gold State Coach, which Matchbox recently released a 1/64-scale replica of, and its value is estimated at GBP1.6 million (about $2 million). At 275 inches long it's even bigger than the Bentley limousine and it weighs about 9,000 pounds. It's 261 years old and designed to be pulled by eight horses, and has been part of every coronation since 1831. The rest of the Royal Family's vehicles are relatively mundane. There's a 1965 Aston Martin DB6 Volante that Queen Elizabeth II and her husband, Prince Phillip, bought for King Charles III on his 21st birthday. It's worth GBP1 million (about $1.2 million). The collection also includes a Rolls-Royce Phantom VI (about $627,000), a Bentley Bentayga (about $201,000), a Land Rover Range Rover long-wheelbase Landaulet ($133,000), a Jaguar XE (about $41,000), and a Land Rover Defender ($38,000). "Luxury cars have long been associated with the monarch and King Charles III, in particular, is known for his fondness of motor vehicles. His impressive collection features sentimental value with motors passed down from his late mother, Queen Elizabeth II, to cars bought for him by his parents," explained Keith Hawes, the director of Nationwide Vehicle Contracts, in an interview with CBS News. Being at the head of a car-making nation's royal family also comes with drawbacks: Every vehicle in King Charles III's fleet is British.

Weekly Recap: Ford GT inspires guitar, foosball table, sailboat

Ford design vice president Moray Callum had just wrapped up a briefing on the interior of the Ford GT last month, but something seemed out of place. He grinned and pointed behind him, "You might be wondering why I have a boat behind me," he said mischievously. It was there because Ford set its designers on a mission to stretch and showcase their talents: design non-automotive objects inspired by the interior of the GT supercar. Callum received quite a response, too. His team produced a guitar, a foosball table (yeah bro!), a racing sailboat, a Wi-Fi speaker and some furniture. As the veteran design chief explained, "It's a really great exercise both to highlight our designers' talents, but also to really see how our design philosophy can work and how you can use it and get a common response back from a worldwide design team." Guitar View 25 Photos The objects have been on display this week at the Salone del Mobile furniture and fashion design fair in Milan, Italy, where Ford has had a presence for three years. There's also a light exhibition that apparently was inspired by the GT, as well. While this might seem a little far-fetched for the automaker, Ford said exhibitions like the Salone del Mobile give its designers another way to be creative and ultimately produce striking interior style. Ford wants this to be a differentiator, as research shows consumers are placing emphasis on the layout and features inside when they're making a decision about buying a new car. It's a little light hearted – but it's also potentially big business. Other News & Notes Cadillac CT6 platform could be used for Buick General Motors product chief Mark Reuss said the Cadillac CT6 platform could be used for a large Buick, though "not yet," Automotive News reported. The underpinnings can accommodate rear-wheel or all-wheel drive and would give Buick the large flagship it lacks. The report jibes with comments Reuss made at a roundtable with Autoblog and other reporters at the New York Auto Show. When asked if Buick had space for a large car on the CT6 chassis, he replied, "Yeah, I think it does. Yeah, I think we do." Buick has revamped its lineup in recent years with attractive crossovers and small and midsize sedans, but hasn't added the proverbial flagship that's yearned for by enthusiasts. Buick surprised industry observers with the stylish Avenir concept at the Detroit Auto Show earlier this year that raised the possibility of a halo sedan.

Jaguar Land Rover exploring 3D HUD and infotainment projections

With its most recent technology research, Jaguar Land Rover (JLR) is exploring the use of 3D projections for a world before and/or after autonomous vehicles come to fruition. In collaboration with the United Kingdom's University of Cambridge, JLR has developed concepts for a 3D head-up display that shows information on the road ahead and a system that projects personalized 3D infotainment for vehicle passengers.  As of right now, hundreds of production vehicles are equipped with two-dimensional head-up displays, some color, others black and white. Using various techniques and different technologies, manufacturers display information in a flat image in front of a driver. Some might find it distracting or unhelpful to have this in the driver's line of sight, and JLR might have found a solution. Rather than wedge the information in between the person and the view ahead, a 3D system that uses augmented reality could display the info onto the road in front of the driver. JLR thinks the system could project navigation directions, safety alerts such as lane departure, hazard detection or other bits typically found in a car's infotainment or instrument cluster. Some might find this to be even more distracting that 2D head-up displays, but to each his or her own. While the 3D head-up display is something that could be used right now, if it were released and passed legal, part two of JLR's 3D technology research is imagined for a life where truly autonomous vehicles are skating across the country. Using head- and eye-tracking technology, the system could lock into the position of numerous people in a vehicle and give each of them a personalized 3D projection "screen." This could be used to track a trip, look up points of interest, or even watch movies. JLR points out this could be used during ride-sharing without bothering others in the vehicle. The work with the Center for Advanced Photonics and Electronics at Cambridge is still in development for now, but it's only a matter of time before 3D tech makes it into cars in some degree.