2008 Lamborghini Murcielago 2dr Cpe Lp640 on 2040-cars

Auto blog

Lamborghini reveals Asterion LPI 910-4 hybrid hypercar concept

There are automakers that roll out concept cars regularly as a matter of course, and there are those that rarely do. Lamborghini falls squarely in the latter category, which makes the vehicle you see here - revealed just a day before the Paris Motor Show - such a rare treat.
It's called the Lamborghini Asterion LPI 910-4, and if you're familiar with Sant'Agata nomenclature, you're probably already picking apart its specs based on those letters and numbers: LP for longitudinal posterior, telling you this is, like all other contemporary Raging Bulls, a mid-engined supercar. 910 tells you how much metric horsepower it packs. The 4 tells you it's all-wheel drive. But along with the name Asterion, borrowed from a mythical minotaur (a hybrid man-bull, for those unschooled in Greek mythology), it's the letter I - standing for "Ibrido" - which speaks of the novelty of this concept.
That's right, you're looking at the first gasoline-electric hybrid Lamborghini. A plug-in hybrid, in fact, that can travel 31 miles on electricity alone. The powertrain combines the 5.2-liter V10 and seven-speed DSG from the Huracán (good for 610 metric horsepower) to a trio of electric motors (good for another 300) to bring total output up to a claimed 910 - equivalent to 897 hp by our standards - assuming all four motors are running at peak output at the same time. That makes it the most powerful Lamborghini we've ever seen, and puts it in league with the McLaren P1 and LaFerrari. The result is a 0-62 time quoted at three seconds flat and a top speed of 199 miles per hour, or up to 78 mph in pure electric mode.

Audi R8, Lamborghini Huracan could get twin-charged five-cylinder

Engine downsizing and forced induction are some of the biggest trends in automotive powertrains today because. They offer the chance to reduce emissions and boost fuel economy, while possibly maintaining power. The shift is already happening to performance cars with turbocharged four-cylinders finding their way into the Ford Mustang, Chevrolet Camaro, and future Porsches. Now, there are rumblings of a tiny chance for a similar change coming for the Lamborghini Huracan and Audi R8. Why the new powertrain? China. While the market there might have slowing growth, it's still a major country for auto sales. The annual taxes on cars there also happen to be based on engine displacement, and there's a 40 percent rate on those over 4.0-liters, according to Car and Driver. The obvious answer to this conundrum is to build a smaller displacement, forced induction engine for the R8 and Huracan. Car and Driver points to the new turbocharged and electrically supercharged, 2.5-liter inline five-cylinder from the recent Audi TT Clubsport Turbo concept as a possible solution. Audi's e-turbo technology runs off a 48-volt electrical system and lithium-ion battery to produce a total of 600 horsepower and 479 pound-feet of torque in the prototype. With this mill, horsepower would barely shrink compared to the R8 V10 Plus and Lambo, but it actually makes more peak torque than their 5.2-liter V10s. While this is all theoretically feasible, take the possibility with a big grain of salt for now. According to Car and Driver, Quattro GmbH's Stephan Reil says that there's no work currently underway to fit the twin-charged five-cylinder, "but it has been talked about." That means such a vehicle is likely years away, if ever. In the meantime, a diesel version of the e-turbo setup is on the way the in the SQ7. Related Video:

Lamborghini's path to the future is paved with forged composites

As far back as 1983, Lamborghini has been researching carbon fiber for automotive use. The automaker felt confident enough in its ability to work with the high-tech material in 1985 that a team led by Maurizio Reggiani, now the Lamborghini Board Member in charge of Research and Development, crafted a revolutionary Countach with a chassis made almost entirely of hand-laid carbon fiber. The result was spectacular in that the car's chassis weighed about half of its all-metal counterpart. It turned out that first foray into carbon fiber was just as spectacular when it was finally tested for crashworthiness, but in a completely different way. Catastrophic would be an appropriate word, according to Paolo Feraboli, who now leads Lambo's brand-new Advanced Composite Structures Laboratory in Seattle, Washington. Proving how far Lamborghini has come since that ill-fated carbon-fiber Countach Evoluzione, Feraboli told us during the ACSL's grand opening that today's Aventador, which boasts a high-tech carbon chassis, aced its very first crash test in 2009. Chalk that success up to high-tech computer modeling and the practical application of lessons learned over several decades of trial and error. The dull red monocoque of that crashed Aventador now hangs on the wall at the ACSL like a functional piece of art, a reminder of Lamborghini's cutting-edge milestones of the past. Lamborghini's future will be hewn from what the company calls forged composites. First seen on the stunning Sesto Elemento Concept from the 2010 Paris Motor Show, the patented carbon-forging process forgoes hand-laid sheets, injected resins, and high-heat autoclaves. Instead, wads of randomly oriented carbon fibers that sort of resemble the kind of dough you'd use to make pasta undergo a three-minute press inside a mold. The resulting parts are just as strong as other carbon-fiber bits, but can be mass-produced at a fraction of the cost. While it's true that cost is often a secondary consideration for high-end supercars, it's still relevant. By reducing the cost and increasing the scale of composite pieces, Lamborghini can then afford to spend more money on other parts of the car. It's not just body panels and chassis components that Lamborghini thinks it can build using forged composite technology. The Sesto Elemento featured forged-composite suspension control arms that haven't yet made it into production, but probably will soon.