2007 Murcielago Lp640 Cpe! Only 1500 Miles-q Citura-egear-ccb's-carbon! Perfect! on 2040-cars

Auto blog

Novitec Torado takes a stab at improving the Lamborghini Aventador [w/video]

Novitec has finished its tuning program for the Lamborghini Aventador, and it has called the mean-looking finished product, Torado. It looks like it wants to take the pedestrian sinisterness of the Aventador into an otherworldly rage, with carbon fiber vents, spoilers and protrusions lining the body from front to back.
Novitec says it's still good for daily use, even with four different stages of power tune and a fifth out-of-the-ballpark injection called "Bi-Kompressor." The power bumps start at 722 horsepower and 519 pound-feet and go up to 969 hp and 672 lb-ft with the bi-kompressor. The exhaust systems included in those packages are also good for shaving around 20 kilos from the car's weight.
There's a short press release below with more on Novitec's work, and a video of the Torado in the wind tunnel.

Lamborghini's path to the future is paved with forged composites

As far back as 1983, Lamborghini has been researching carbon fiber for automotive use. The automaker felt confident enough in its ability to work with the high-tech material in 1985 that a team led by Maurizio Reggiani, now the Lamborghini Board Member in charge of Research and Development, crafted a revolutionary Countach with a chassis made almost entirely of hand-laid carbon fiber. The result was spectacular in that the car's chassis weighed about half of its all-metal counterpart. It turned out that first foray into carbon fiber was just as spectacular when it was finally tested for crashworthiness, but in a completely different way. Catastrophic would be an appropriate word, according to Paolo Feraboli, who now leads Lambo's brand-new Advanced Composite Structures Laboratory in Seattle, Washington. Proving how far Lamborghini has come since that ill-fated carbon-fiber Countach Evoluzione, Feraboli told us during the ACSL's grand opening that today's Aventador, which boasts a high-tech carbon chassis, aced its very first crash test in 2009. Chalk that success up to high-tech computer modeling and the practical application of lessons learned over several decades of trial and error. The dull red monocoque of that crashed Aventador now hangs on the wall at the ACSL like a functional piece of art, a reminder of Lamborghini's cutting-edge milestones of the past. Lamborghini's future will be hewn from what the company calls forged composites. First seen on the stunning Sesto Elemento Concept from the 2010 Paris Motor Show, the patented carbon-forging process forgoes hand-laid sheets, injected resins, and high-heat autoclaves. Instead, wads of randomly oriented carbon fibers that sort of resemble the kind of dough you'd use to make pasta undergo a three-minute press inside a mold. The resulting parts are just as strong as other carbon-fiber bits, but can be mass-produced at a fraction of the cost. While it's true that cost is often a secondary consideration for high-end supercars, it's still relevant. By reducing the cost and increasing the scale of composite pieces, Lamborghini can then afford to spend more money on other parts of the car. It's not just body panels and chassis components that Lamborghini thinks it can build using forged composite technology. The Sesto Elemento featured forged-composite suspension control arms that haven't yet made it into production, but probably will soon.

2015 Lamborghini Huracan LP 620-2 Super Trofeo [w/video]

Pull a run-of-the-mill Lamborghini Huracan LP 610-4 off the Sant'Agata Bolognese assembly line, and you'll get a fearsome piece of machinery that can hit 60 miles per hour in as little as 2.5 seconds and reach a terminal velocity in excess of 200 mph. The stats are stunning, but the boys at Lamborghini want more – not just numerically, but more in the greater glory of an all-encompassing, brand-aggrandizing, Ferrari kind of way. Why compare the Raging Bull with the Prancing Horse in particular? Surely, any self-respecting gearhead knows that the two brands exude subtly different swaggers. But the gap goes well beyond the superficial: while Ferrari (not to mention competitors like McLaren and Porsche) has nurtured an enviable racing history from LeMans to Monaco, Lamborghini's history on the track is a bit scarcer. The Volkswagen Group recently thrust Bentley back into competition to reinvigorate the brand's past glories, and the next VW brand to win the racing lottery is Lamborghini. Behold: the Lamborghini Huracan LP 620-2 Super Trofeo. Born To Race While Lamborghini claims a long history of wedge-shaped exotica, the Huracan was the first production car in the brand's half-century history to be engineered from scratch with the racetrack in mind. As such, the street car's screaming, naturally-aspirated V10 and 3,135-pound curb weight are mere starting points for Dallara Automobili, the firm tasked with developing the racecar in conjunction with Lamborghini. For starters, the standard Huracan is alleviated of many of its pedestrian trappings like airbags, sound systems, and swanky power-operated leather seats. By jettisoning the unnecessary, the Super Trofeo manages to slim down nearly 330 pounds, to around 2,800 pounds. Don't let the mere 10 (metric) horsepower jump fool you: the LP 620-2's Motec engine management system not only adds data acquisition capabilities (which work alongside an eight-setting traction control system and a 12-setting Bosch ABS setup), it completely changes the power delivery characteristics of that 5.2-liter V10. More on that later. A good chunk of that weight loss comes from the removal of the entire front end of the drivetrain, which transforms this Huracan from an all-wheel-drive animal to a rear-drive beast.