2012 - Jeep Wrangler on 2040-cars

Auto blog

Some Jeep Cherokees and Chrysler 200s to get standard stop-start in 2015

Automakers the world over are striving to find ways to make their models more efficient, and Chrysler has a solution for some versions of the 2015 Chrysler 200 and 2015 Jeep Cherokee (2014 model shown). The Tigershark 2.4-liter four-cylinder in the 200 and the 3.2-liter Pentastar V6 in the Cherokee are getting a slight boost later this year thanks to the addition of Chrysler's Engine Stop-Start system as standard equipment. The company predicts modest gains - a three-percent improvement in fuel economy and a three percent reduction in CO2 emissions with the new tech compared to without it. While it's not much, those who sit in traffic a lot may see a difference.
Chrysler's stop/start system uses a high-speed starter motor to restart the vehicle in a claimed a third of a second. It works by detecting when the vehicle comes to a stop and turning off the engine. A more powerful battery maintains all of the model's accessories while it sits. When the driver lets off the brake, the car starts up again to drive away. There is even a button in the cabin to turn the ESS off, if desired.
The Jeep will be the first to receive ESS in the third quarter of this year to coincide with the start of production of the 2015 model-year version. The 200 will follow in the fourth quarter as a rolling change in production.

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.

Alfa Romeo will gain a Jeep Compass-based SUV

It was reported earlier this week that FCA would invest into its Italian factories to ramp up production at currently underutilized locations. Those plans have now been clarified with official information from FCA, as reported by Automotive News. The entire investment is worth $5.7 billion. First of all, Alfa Romeo will gain a new compact SUV based on the Jeep Compass architecture. The still-unnamed model will be available as a plug-in hybrid, and it will be built in Pomigliano, Italy. No U.S. availability has yet been announced, but it would not be odd to see the Compass-based model sold below the Stelvio in the States. The last time Alfa Romeo had anything similar in its model portfolio was when it offered Crosswagon-badged four-wheel-drive versions of the 156 and 159 wagons. As for the Jeep Compass itself, it will begin to be built at the Melfi plant in Italy. The rumored small "baby" Jeep slotting under the Renegade has not yet been officially mentioned. Fiat will introduce a battery electric 500, built in Turin, and the Pomigliano plant that will make the compact Alfa Romeo SUV will also be used to build a mild hybrid version of the Panda city car. The 500X will gain a PHEV variant. The Stelvio platform will also spawn a corresponding SUV for Maserati, and FCA also mentioned Maserati will introduce a new, unnamed model it will make in Modena. Automotive News quotes Italian press as saying this will be the Alfieri coupe and convertible, also offered as battery electric versions. Related Video: