1995 Jeep Wrangler Se Yj 4x4 A/c Automatic 4.0l Inline 6 Cylinder New Soft Top on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

Project Trail Force Jeep Wrangler goes to SEMA, then to a lucky winner

Extreme Terrain is an aftermarket parts company focused on the Jeep Wrangler. Partly just because it's a really cool thing to do, and probably having something to do with Jeep's upcoming 75th anniversary, Extreme Terrain found some dance partners to help work up a special 2015 Wrangler Rubicon that it will show off at the Bantam Jeep Heritage Festival in Butler, PA, then at SEMA in November, where it will be given away. Extreme worked with Barricade Off-Road and Kevin Tetz from the Spike show Trucks! to build the Wrangler it calls Project Trail Force. There is more than $24,000 worth of aftermarket gear on it, starting with the Ripp centrifugal supercharger that pumps an additional 140 horsepower into the 3.6-liter V6. It's got a 3.5-inch lift kit from Rock Krawler, Dana 44 axles strung between 37-inch BFG tires, Barricade bumpers, a 9,500-pound winch, fender flares, rock sliders, a 50-inch LED light bar above the windshield, LED spotlights on the A-pillars, and seven-inch KC Hilites headlights. Rugged Ridge worked over the inside with upgrades like all-terrain floor and cargo liners, plus seat covers, and a new navigation system with a back-up camera. If you want to win it, you can enter the contest at Extreme Terrain once every week until Oct. 23. The winner gets flown to SEMA to have Kevin Tetz hand the keys over. If you just want to see it, you can head to PA for that heritage festival. The Project Trail Force will also lead a Jeep parade that could set a Guinness World Record. The press release below has a lot more info on the build. Good luck. EXTREMETERRAIN AND BARRICADE OFF-ROAD TO UNVEIL THEIR FULLY-BUILT 2015 JEEP WRANGLER AT BANTAM JEEP FESTIVAL ExtremeTerrain.com and Barricade Off-Road teamed up to build a $73,000+ 2015 Jeep Wrangler Rubicon to be given away to a lucky winner at the 2015 SEMA Show • Giveaway Link: http://www.extremeterrain.com/jeep-wrangler-project-trailforce-giveaway.html • Video: https://www.youtube.com/watch?v=jsO6fxVq6kI MALVERN, Pa. (June 12, 2015) – ExtremeTerrain, a leader in providing aftermarket Jeep Wrangler parts, along with rugged, enthusiast-driven Jeep Wrangler aftermarket armor and accessories manufacturer Barricade Off-Road, today unveiled a fully-built 2015 Jeep Wrangler Rubicon dubbed Project Trail Force at the Bantam Jeep Heritage Festival in Butler, PA.

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.