1993 Jeep Wrangler on 2040-cars

Auto blog

FCA recalling 400k Jeep Wranglers, 40k Fiat 500s

The Basics: Fiat Chrysler Automobiles has issued two recall. The first is for 392,464 Jeep Wranglers in the US from the 2007-2010 model years for the steering wheel airbags. The second covers 39,217 examples of the naturally aspirated 2012-2016 Fiat 500 in connection with the clutch release mechanism. The Problem: In the Wranglers' steering wheel, excessive accumulation of dust and dirt from open-air driving off-road could compromise the clockspring in the steering-wheel assembly and prevent the airbag from deploying in the event of a crash. In the case of the Fiats, the clutch travel in a small percentage of vehicles equipped with manual transmissions "may exceed design parameters" and eventually damage components. Injuries/Deaths: No injuries or accidents been reported to result from either issue. The fix: Dealers will install new back covers and column shrouds in the Jeeps and upgrade the clutch release systems in the 500s. If you own one: Expect to hear from the manufacturer to arrange service. In the case of the Fiat recall particularly, FCA "urges customers to heed the instructions on their recall notices." Related Video: Statement: Clockspring May 18, 2016 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 392,464 older-model SUVs in the U.S. to replace their clockspring assemblies and related components. Located in a vehicle's steering wheel, a clockspring forms part of the circuit that helps control airbag function. An investigation by FCA US determined excessive exposure to dust and dirt – consistent with extensive off-road driving or driving with a vehicle's top and/or doors removed – may compromise the clockspring and eventually prevent driver-side airbag deployment in a crash. If this condition is present, the airbag warning-lamp will be illuminated. If such an event occurs, customers are advised to contact their dealers. The Company is unaware any potentially related injuries or accidents. Affected by this campaign are model-year 2007-2010 Jeep Wrangler SUVs. An additional 7,435 model-year 2011-2016 vehicles equipped with right-hand drive for special duty also are affected in the U.S. Vehicles affected outside the U.S. comprise an estimated 35,412 in Canada; 8,529 in Mexico and 62,580 outside the NAFTA region. Customers will be advised when they may schedule service, which includes installation of a new steering-wheel back cover and a steering-column shroud.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.