2006 Jeep Liberty Sport Automatic Four Wheel Drive 59561 Low Miles 3.7 V6 Clean on 2040-cars

Auto blog

FCA recalls 15k Grand Cherokees, Durangos over brake issues

The Basics: Fiat Chrysler Automobiles is recalling 14,768 examples of the Jeep Grand Cherokee and Dodge Durango, both from the 2015 and 2016 model years, and built between December 9, 2015, and January 14, 2016. The Problem: The left front brake caliper on some vehicles may have been made from the wrong type of iron, and could be prone to crack. A cracked brake caliper may not function properly. Injuries/Deaths: None reported. The problem was discovered by the automaker during testing. The fix: Dealers will need to check the casting date of the component in question, and if necessary, replace the brake caliper. The schedule for carrying out the recall service has yet to be outlined. If you own one: Expect to hear from the manufacturer to arrange an appointment with your local dealer. Related Video: RECALL Subject : Front Left Brake Caliper May Break Report Receipt Date: MAR 23, 2016 NHTSA Campaign Number: 16V168000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 14,768 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Jeep Grand Cherokee and Dodge Durango vehicles manufactured December 9, 2015, to January 14, 2016. In the affected vehicles, the left front brake caliper may crack due to being made from an incorrect material. CONSEQUENCE: A cracked brake caliper may lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the front left brake caliper and depending on its casting date, replace it, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S16. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

Final Toledo Jeep decision may have nothing to do with city's efforts

Toledo, OH is doing all that it can to keep production of the Jeep Wrangler in its boundaries, but the biggest issue facing the plant may be insurmountable, no matter how desperately the city wants to keep the Wrangler local. The Wrangler is built in a rather interesting manner at the Toledo Supplier Park: Fiat Chrysler only handles the very final assembly of each vehicle, while two other companies, Kuka, a German firm, and Hyundai-Mobis, a member of the sprawling Hyundai empire, produce the body and chassis, respectively. The vehicles are then transferred over to the FCA part of the park, where they're painted and completed. This was, as The Detroit News explains, a convenient arrangement back in 2006 when the supplier park opened. Chrysler, which was still owned by Daimler at the time, arranged for Kuka and Mobis to handle production, saving it a huge sum of money. Both suppliers own their own machinery and buildings and employ their own workers. Now that FCA is a relatively healthy entity, though, there's not a lot of need to be sharing profits with two other companies. "What [FCA boss Sergio Marchionne] would like is to have the advantages of high-capacity utilization, owning that capacity and taking advantage of that for himself versus having a supplier doing some of the things his competitors do internally," David Cole, chairman emeritus at the Ann Arbor, MI-based Center for Automotive Research, told The News. "It really adds another level of complexity to the situation." While Sergio Marchionne is a man that generally gets what he wants, it seems unlikely that either Mobis or Kuka would give up their role quietly. According to Jon Zapf, Mobis North America's chairperson for UAW Local 12, the company "definitely wants to maintain their part of this production process." According to The News, Jeep is likely to announce the location of next-generation Wrangler production in June. Expect to hear much more on this one in the coming months.