07 Jeep Liberty Sport 3.7l V6 4x4 Suv 2 Owner 80+ Pix on 2040-cars

Auto blog

2014 Jeep Cherokee starting price set at $22,995*

Love it or hate it, the 2014 Cherokee is on its way to a Jeep showroom near you this fall. Today, Chrysler announced the different trim levels, features and pricing for its new compact utility with a starting price of $22,995 (*not including $995 for destination), which is $400 less than the 2012 Liberty it ostensibly replaces.
Available in four trim levels - Sport, Latitude, Limited and Trailhawk - the new Cherokee will come standard with Chrysler's 2.4-liter Tigershark inline four-cylinder engine with the upper three levels offering the option of the company's 3.2-liter Pentastar V6. The base Sport is your typical entry-level model, featuring equipment including manual cloth seats and black exterior mirrors and door handles, but it also has a five-inch Uconnect media center, LED taillights and 10 standard airbags. Stepping up from the Sport model, Latitude and Limited trims bring increasing levels of luxury starting at $24,495 and $27,995, respectively. All three of these trims are front-wheel drive in standard configuration and offer varying versions of Jeep's Active Drive four-wheel-drive system.
The range-topping $29,495 Cherokee Trailhawk (shown above) comes standard with four-wheel drive and numerous upgrades to earn Jeep's Trail Rated fender badge. These changes include a unique design that adds an off-road suspension with taller ride height giving more aggressive approach and departure angles, underbody skid plates, distinguishing exterior design elements and a seven-inch, reconfigurable instrument gauge cluster similar to what it found in high-trim Dodge Dart models. Scroll down for a full breakdown of the 2014 Cherokee pricing and trim levels, and let us know what you think of the model's pricing and equipment in Comments.

Jeep reveals annual Moab Easter Jeep Safari concepts

Jeep has unveiled its annual spate of concepts before the Easter Jeep Safari. Those start with the Grand Cherokee Trailhawk Concept (below left), complete with the company's EcoDiesel V6 engine. Designers threw in a set of 35-inch Mickey Thompson tires wrapped around 17-inch Rubicon wheels, and a set of custom fender flares help keep all that rubber under wraps.
Meanwhile, the Wrangler Mopar Recon (below right) packs a 6.4-liter Hemi V8 good for 470 horsepower. All that grunt gets to the ground via a five-speed automatic transmission and a set of a Dana 60 axles frond and rear with 4.10 gears. The Recon also makes use of a 4.5-inch prototype long-arm kit and a set of prototype eight-lug bead lock wheels.
The Wrangler Stitch (below left) builds on the momentum of the Wrangler Pork Chop Concept. Engineers once again set out to strike as much weight as possible from the vehicle, and actually managed to trim the curb weight down to 3,000 pounds. That effort has given the machine the same power to weight ratio as the Grand Cherokee SRT8. Plenty of carbon fiber, door deletes and a chrome moly roll cage all help trim those pounds, and a set of DanyTrac Pro Rock 44 axles with 4.88 gears and ARB lockers front and rear let this machine scramble over whatever is in its path.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.