Auto blog

Chrysler axes old V6s, goes all-Pentastar

Old technology has a way of lingering on, particularly at Chrysler headquarters in Auburn Hills. So while the Pentastar V6 has replaced the older engine architecture in just about every application, it still soldiered on in some export markets. But the introduction of a new 3.0-liter Pentastar V6, produced in Michigan and meant only for the Chinese market, has put the final nail in the old engine's coffin.
Fitted into the 2014 Jeep Grand Cherokee and Jeep Wrangler just introduced to China at the Chengdu Motor Show, the downsized six uses the same architecture as the larger 3.6-liter Pentastar V6. But because of its 2,997cc capacity, it can be exported to China without the increased duty the 3.6-liter or even 3.2-liter Pentastar engines would incur. The 3.0-liter V6 develops 230 horsepower at 6,350 rpm and 210 pound-feet at 4,400 rpm.
Admittedly, it's unlikely, but even though the engine was said to be created solely to undercut tax thresholds in China and Europe, the 3.0-liter Pentastar has recently surfaced in rumors of an application here: as the boosted heart of a potential Cherokee SRT with anywhere from 375 to 410 hp.

Jeep Liberty under investigation for door fires

The Jeep Liberty has already had plenty of attention for possible fires thanks to the first-gen model's fuel tank, but now the midsize Jeep is under the microscope of the National Highway Traffic Safety Administration for another fire-related concern. NHTSA has opened an investigation for the 2012 Liberty after receiving two reports of electrical fires in the driver's door.
According to the investigation summary, around 80,000 vehicles could potentially be affected by this problem. In both reported fires, the drivers noticed smoke and then flames from the master power window switch, and they had to pull to a stop and exit through the passenger side of the SUV. According to Autoguide, there was one injury to a motorist who suffered burned fingers while trying to open the driver's door.
Interestingly, the Dodge Nitro is not yet involved in this investigation, even though it was still around for the 2012 model year; the Nitro ended production in 2011 about a year before the final Liberty rolled off the line for the 2013 model year. Scroll down for the official NHTSA investigation summary.

NHTSA investigates FCA for SUVs that roll out of Park

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Dodge Durango and 2014-205 Jeep Grand Cherokee after 14 complaints of the SUVs rolling out of Park. An estimated 408,000 of them could be affected, if a recall is necessary. All of the current complaints submitted to NHTSA about the issue concern the Grand Cherokee, and the claims allege that the SUV can roll out of Park whether or not the engine is running. Some folks report that they check the indicator each time because the gear sometimes fails to engage. Among the 14 cases, there are five accounts of crashes and three injuries, including a situation with someone allegedly being rolled over. NHTSA's preliminary evaluations are meant to investigate "the scope, frequency, and safety-related consequence" of a reported problem. They don't necessarily lead to a recall. Related Video: INVESTIGATION Subject : Unattended vehicle rollaway Date Investigation Opened: AUG 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15030 Component(s): POWER TRAIN All Products Associated with this Investigation Vehicle Make Model Model Year(s) DODGE DURANGO 2014 JEEP GRAND CHEROKEE 2014-2015 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: The Office of Defects Investigation (ODI) has received 14 complaints (VOQs) alleging that after being placed in Park the subject vehicles have then rolled away from their parked position. The unintended motion has occurred with both the engine off and the engine running. ODI has also identified EWR field report data related to the alleged defect. The model year 2014 and 2015 Jeep Grand Cherokee vehicles are equipped with an electronic gear selector (shift-by-wire system). The gear selection is made by pressing the shifter-paddle forward or backwards; the shifter does not move along a gate path as with conventional gear selectors. A Preliminary Evaluation has been opened to asses the scope, frequency, and safety-related consequence of the alleged defect. The VOQs associated with the opening of this investigation are: 10733158, 10730952, 10683556, 10679497, 10583366, 10725429, 10715401, 10711893, 10676998, 10668651, 10662619, 10662308, 10605865, and 10567538.