99 Jeep Cherokee Classic Great Vehicle For Parts Or Fix. on 2040-cars

Auto blog

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.