8in Lifted Jeep Cherokee Xj Lots Of Upgrades! on 2040-cars

Auto blog

2018 Jeep Wrangler spied looking more aerodynamic

We're getting an early look at one of the most anticipated vehicles from Jeep: the next-generation Wrangler. We expect it to arrive for the 2018 model year and be aluminum-intensive for purposes of weight savings, which will improve fuel economy. The platform is expected to remain a traditional body-on-frame setup, and manufacturing will remain at its longtime Toledo, OH, factory. The design appears true to the Wrangler's heritage, though the windshield is raked back more to make it less brick-like when cutting through the air. From some angles, the front end appears longer if you squint properly, and the front fenders seem wider and squatter than the current model's. There's probably more in store for the new Jeep, but this prototype is under such heavy cladding it's impossible to tell what. Kudos to the folks who make those vinyl coverings. Look for the powertrain to again include a Pentastar V6, this time paired to an eight-speed automatic transmission – again for fuel economy, but also to improve the powertrain's flexibility. A V6 turbo diesel and a mild- hybrid variant are also expected. Even with all these departures from the long-running Wrangler playbook, the off-road capability will remain the vehicle's calling card. The current Wrangler will also be built concurrently with this next-gen model for a time in Toledo, Automotive News reports, giving enthusiasts and traditionalists the best of both worlds. Jeep will also add a pickup based on the Wrangler's underpinnings to its portfolio in a move to capitalize on the resurgence of smaller trucks. The Wrangler is both the halo and centerpiece of the remade Jeep lineup, which quickly is becoming one of Fiat Chrysler's pillars for sales and prestige around the world. Jeep hopes to sell 2 million vehicles globally by 2018. Related Video:

Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum

During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.