2002 Jaguar Xk8 Base Convertible 2-door 4.0l on 2040-cars

Auto blog

How Jaguar optimized the Ingenium gas engine for the F-Type

At the 2017 New York Auto Show, Jaguar showed off the new entry-level F-Type, packing a 2.0-liter, turbocharged, gasoline-fueled inline-four that produces 296 horsepower, which is built in-house in the UK. It's the debut of this branch of the Ingenium engine series, and it's also the top of the Ingenium gas range; most JLR vehicles will offer a less powerful 247-hp version. We caught up with Jaguar's engineers to figure out exactly how this high-output Ingenium engine differs, and what Jaguar had to do to fit it in the F-Type's engine bay. While all Ingenium 2.0-liter gas fours share major architecture – the aluminum block and heads, as well as the bore and stroke – there are some internal differences. The most important are the low-compression pistons, which allow for more boost without detonation. The new compression ratio is 9.5:1, compared to the 10.5:1 ratio in the 247-hp spec engines. To make the most out of more boost, you need new plumbing and a way to get more fuel into the combustion chamber. So Jaguar fitted a larger twin-scroll turbocharger that's unique to this application. It features low-friction ceramic ball bearings – Jaguar says this improves transient response. There are also new fuel injectors and a fuel pump to accommodate the increased demand for gas in the high-output engine. On the back end, there's a unique exhaust system with active flaps to give it a louder bark when called for. Of course, some new hardware and more boost means the various electronic systems that control the engine needed changes. For one, Jaguar's changed the cam timing and valve lift mapping, as well as the ignition timing. The throttle mapping and transmission calibration have also been optimized for the new engine. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. As far as the driver's concerned, the biggest change from the 247-hp engine to the 296-hp one – other than increased scoot – will be where the power peak is. The 296-hp engine makes peak power at a higher point in the rev range, which should reward drivers who generously prod the throttle and hold gears in manual mode. Remember, F-Types equipped with this engine will only be available with an automatic transmission. You should also remember that it's an excellent gearbox overall, with rapid, smooth shift characteristics, if the other 8-speed Jaguars are anything to go by.

The Jaguar XE SV Project 8 looks like an XE, but is almost completely new

Jaguar's XE SV Project 8 is a thoroughly astonishing sports sedan. With a 592-horsepower V8, it's the most powerful Jaguar road car ever produced. And it's amazing to think that Jaguar's most powerful car is a version of its entry-level sedan. Or at least it looks that way. In reality, the majority of the body is completely unique to the Project 8. A Jaguar representative told us that only the roof and door skins are shared with the standard XE. The other 70 percent of the exterior is completely unique to the car. These changed body panels include wider fenders of course, and many of the pieces are made from carbon fiber rather than metal, but there are also some more unusual tweaks. For instance, the headlights actually had to be moved to a different position to make space for the Project 8's massive wheels and tires. The tires, for reference, are 265-mm wide at the front, and the rears are 305-mm wide. There were also some changes for style. The air vents at the front that consist of many small holes in the bumper are a tribute to Jaguars of the past. The hexagonal shape of the holes apes that of the vintage Jaguar logo, which featured the word Jaguar in an elongated hexagon. All in all, there's an impressive amount of new engineering that went into creating the Project 8. The results are, in a word, stunning. Related Video:

Automotive Grade Linux will be the backbone of your connected car

Creating a backend for a secure, reliable, and expandable infotainment system is costly and time consuming. The Linux Foundation, a non-profit organization, has set out to promote and advance the Linux operating system in commercial products. Automotive Grade Linux, or AGL, is a group within the Foundation that seeks to apply a Linux backend to a number of automotive applications in a variety of vehicles from various suppliers and manufacturers. AGL's goal is to create a common, unifying framework that allows developers and manufacturers to easily implement applications across platforms. Currently, the focus is on infotainment systems, but AGL has plans for instrument clusters, heads-up displays, and eventually active safety software. At CES, a display from Panasonic showed a completely digital and customizable dashboard that allows information and apps to be moved from the gauge cluster to the infotainment screen and back, all through the use of gesture and touch controls. Although the organization has been around for five years, it's really only been in the past three that the group has been working hand in hand with automakers and suppliers. The first two OEMs to participate, Toyota and Jaguar Land Rover, have since been joined by Mazda, Suzuki, Ford, and, as of this week, Daimler. The latter is important as until now most of AGL's partner's have been based in Japan or the US. Other partners include suppliers Denso, Renesas, Continental, Qualcomm, and Intel. AGL want's to supply roughly 80 percent of the backend, allowing partners to then finish and refine the Linux system for each individual application. Think of how the Android operating system is refined and customized for individual smartphones from Samsung, LG, and Motorola. While the final product looks different, developers can have an application that will work across all AGL systems. Because it is open source, anyone can use and develop for AGL. You can even go onto the group's website and download a copy right now. There is also a software development kit available that helps facilitate app creation on the platform. Vehicle development cycles take roughly five years, so there currently are no cars that run an AGL backbone available for consumers. AGL Executive Director Dan Cauchy says products should be hitting the market later this year, with even more coming in 2018. Right now, the industry is relatively fragmented when it comes to infotainment and related systems.