Custom 1996 Jaguar Xj6 Vanden Plas (beautiful Head Turner) on 2040-cars

Auto blog

Jaguar Land Rover calling in 100k vehicles in three separate campaigns

Jaguar Land Rover is recalling an estimated 104,114 vehicles in three separate campaigns in cooperation with the National Highway Traffic Safety Administration. The largest of them affects Range Rovers made between April 15, 2005, and September 4, 2012, covering 74,648 units in America from the 2006 to 2012 model years. In those affected vehicles, the front brake hose could rupture, leaking brake fluid and decreasing the capability of the brakes to, you know... stop the vehicle. In a similar but separate recall, subsequent Range Rovers from the 2013 and 2014 model years (manufactured between August 16, 2012, and January 8, 2014) are also being recalled for a brake issue – this time due to the incorrect routing of the brake vacuum hose. The issue could wear down the hose and disable the power assist, again impeding the brakes from properly functioning. This second recall also affects the 2014 Range Rover Sport (specifically those manufactured between May 7, 2013, and January 8, 2014), affecting 24,679 units between both models across the United States. A third smaller recall concerns the 2012-2015 Jaguar XK – namely those built between March 4, 2011, and March 20, 2014. This campaign involves the front side parking lamps, which might switch off after about five minutes, in contravention of federal standards. As such, an estimated 4,787 units are being called in. In all three cases, owners of the affected vehicles can expect to hear from their local dealer to arrange to bring in their wayward British luxury vehicles to have the relevant issue fixed. RECALL Subject : Front Brake Hose(s) may Rupture Report Receipt Date: JAN 27, 2015 NHTSA Campaign Number: 15V039000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 74,648 Manufacturer: Jaguar Land Rover North America, LLC SUMMARY: Jaguar Land Rover North America, LLC (Land Rover) is recalling certain model year 2006-2012 Land Rover Range Rover vehicles manufactured April 15, 2005, to September 4, 2012. One or both of the flexible front brake hoses may rupture causing loss of brake fluid. CONSEQUENCE: If one or both of the flexible brake hoses fails, the vehicle may require a longer distance to stop, increasing the risk of a crash. REMEDY: Land Rover will notify owners, and dealers will replace the left and right front brake hoses, free of charge. The recall is expected to begin March 13, 2015. Owners may contact Land Rover customer service at 1-800-637-6837.

Jaguar turns down offers to join V8 Supercars, questions AMG, Volvo participation

Rumors have swirled in recent weeks that Jaguar may be the next manufacturer to join the V8 Supercars racing series, made popular in Australia but now well-known in other parts of the world as well. Sadly, Jag's participation is not to be. In fact, it would be "insane," according to Jaguar Land Rover Asia Pacific Managing Director David Blackhall, for it to accept either of the two offers it has received to bring Jaguar into V8 Supercars.
Not only is Jaguar not interested in entering V8 Supercars, says Blackhall, it also fails to understand the recent entries from AMG and Volvo. "I don't know what it does for AMG to get flogged by a V8 Commodore week after week, but it's their brand, their issue. And the same thing will happen to Volvo to be honest."
Judging by Blackhall's statements to motoring.com.au, after not-so-serious consideration, the automaker decided the monetary commitment it would take to compete for wins would be more than any potential exposure would be worth, despite the fact that Jaguar has a 5.0-liter V8 to go along with what would seem to be a tailor-made rear-wheel-drive chassis. For what it's worth, one offer would have had Jaguar putting its name across an engine made by someone else, an option that was flatly turned down.

Driving Jaguar's Continuation Lightweight E-Type

Something has happened to sports cars over the past 15-20 years. While reaching ever-higher levels of quantitative dominance the driving experience continues to become more sterile. Stability control, torque vectoring, variable electronic steering racks, lightning-quick dual-clutch automatic transmissions – all these make it easier to harness more power and drive faster than ever before. And yet too often it feels like something is missing. There is a growing divide between the capabilities of the modern performance car and the driver's sense of connection to the experience. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. The story of the Lightweight E-Type goes back to 1963, when Jaguar set aside eighteen chassis numbers for a run of "Special GT E-Type" cars. These were factory-built racers with aluminum bodies, powered by the aluminum-block, 3.8-liter inline-six found in Jaguar's C- and D-Type LeMans racecars of the 1950s. Of the eighteen cars slated for production, only twelve were built and delivered to customers in 1964. For the next fifty years, those last six chassis numbers lay dormant, until their rediscovery a couple of years ago in a book in Jaguar's archives. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. Jaguar Heritage, a section of Jaguar Land Rover's new Special Vehicle Operations (SVO) division, took on the task of researching the original Lightweight E-Types and developing the methods to create new ones. Every aspect of the continuation Lightweight E-Type, from the development of the tools and molds used to build the cars, to the hand-craftsmanship, reflects doing things the hard way. They may not build them like they used to, but with these six special E-Types, Jaguar comes awfuly close, if not better. Working alongside the design team, Jaguar Heritage made a CAD scan of one side of an original Lightweight E-Type body. That scan was flipped to create a full car's worth of measurements. That ensured greater symmetry and better fit than on the original Lightweight E-Types (which could see five to ten millimeter variance, left-to-right). The scan was also used to perfect the frame, while Jaguar looked through notes in its crash repair books to reverse-engineer the Lightweight E-Type's suspension. The team repurposed a lot of existing tooling for the continuation cars, and developed the rest from analysis of the CAD scan.