1996 Jaguar Xj6 Vanden Plas 4-door 4.0l on 2040-cars

Auto blog

Lister Knobbly returning to limited production for 60th anniversary

Lister Cars was one of the pedigree names of British racing from its founding in 1954 and then on and off until the early 2000s. The company combined its own lightweight chassis with engines from other manufacturers, many of them British (and especially from Jaguar). Last year, the name and the intellectual property were sold to a new company that planned to revive the brand. For Lister's 60th anniversary, it is building a new version of one of its most famous racecars, the 1958 Lister-Jaguar Knobbly. The 2014 Listers are built to the exact specifications of the original cars, and the aluminum bodies are hand-formed on the original jigs. It is offered in racing trim starting at 249,000 pounds ($409,618) and is certified for FIA historic racing. There's also a road-legal version starting at 259,000 pounds ($426,060), if you don't intend to race but do intend to drive. There are two engines available, just like in the original car. A reproduction Jaguar D-Type 3.8-liter inline-six with dry-sump lubrication pumps out 330 horsepower and 295 pound-feet of torque with a four-speed Jaguar gearbox. The other option is a 4.6-liter Chevy V8 with 315 hp and 290 lb-ft with a four-speed manual transmission. The Chevy-engined version also gets a slightly altered body with a higher hood to clear the engine. The first 2014 Listers will be delivered in the UK this April. Unlike many of these boutique sportscars, the racing version will be available to US buyers, but Lister won't federalize the road version due to the high cost. Scroll down to get all of the details about the revived racer. LISTER MOTOR COMPANY LAUNCHES NEW 60th ANNIVERSARY BROCHURE AS THE ORDER BOOKS BEGIN TO FILL New 60th Anniversary Lister Jaguar brochure now available 50 per cent of 2014 production already sold First cars to be delivered in April, 2014 Road-going variant to be offered at GBP259,000 + tax Race-going version to be GBP249,000 + tax. Following the recently announced purchase of the Lister Motor Company in May 2013, the company is delighted to announce that it has now published its 60thAnniversary Lister Jaguar brochure, which fully outlines the specifications for its fantastic recreation of the iconic Lister Jaguar 'Knobbly' racing car.

How Jaguar optimized the Ingenium gas engine for the F-Type

At the 2017 New York Auto Show, Jaguar showed off the new entry-level F-Type, packing a 2.0-liter, turbocharged, gasoline-fueled inline-four that produces 296 horsepower, which is built in-house in the UK. It's the debut of this branch of the Ingenium engine series, and it's also the top of the Ingenium gas range; most JLR vehicles will offer a less powerful 247-hp version. We caught up with Jaguar's engineers to figure out exactly how this high-output Ingenium engine differs, and what Jaguar had to do to fit it in the F-Type's engine bay. While all Ingenium 2.0-liter gas fours share major architecture – the aluminum block and heads, as well as the bore and stroke – there are some internal differences. The most important are the low-compression pistons, which allow for more boost without detonation. The new compression ratio is 9.5:1, compared to the 10.5:1 ratio in the 247-hp spec engines. To make the most out of more boost, you need new plumbing and a way to get more fuel into the combustion chamber. So Jaguar fitted a larger twin-scroll turbocharger that's unique to this application. It features low-friction ceramic ball bearings – Jaguar says this improves transient response. There are also new fuel injectors and a fuel pump to accommodate the increased demand for gas in the high-output engine. On the back end, there's a unique exhaust system with active flaps to give it a louder bark when called for. Of course, some new hardware and more boost means the various electronic systems that control the engine needed changes. For one, Jaguar's changed the cam timing and valve lift mapping, as well as the ignition timing. The throttle mapping and transmission calibration have also been optimized for the new engine. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. As far as the driver's concerned, the biggest change from the 247-hp engine to the 296-hp one – other than increased scoot – will be where the power peak is. The 296-hp engine makes peak power at a higher point in the rev range, which should reward drivers who generously prod the throttle and hold gears in manual mode. Remember, F-Types equipped with this engine will only be available with an automatic transmission. You should also remember that it's an excellent gearbox overall, with rapid, smooth shift characteristics, if the other 8-speed Jaguars are anything to go by.

GM, Audi, Jaguar halt Russian sales amidst ruble's collapse

The value of Russia's ruble currency has sunk like a stone tossed in the Volga for much of the year, losing over 40 percent of its worth since June. The change is having bizarre effects on the auto industry there and leaving some automakers scrambling to adjust. According to Bloomberg, Russians are buying up luxury goods including automobiles at the moment to have a physical investment in case the ruble sinks further. However, with the money worth so little, the companies aren't making much from these transactions. Things are so dire that several automakers are temporarily ending deliveries until the situation stabilizes. According to Bloomberg, General Motors stopped sales on December 16 with no set date to start again. Audi did the same thing but with the intention to resume once it has adjusted model pricing. Jaguar Land Rover terminated business until December 19 to see how things changed. Toyota is increasing its pricing, as well, but keeping business open at the same time. Some automakers have subtly been reacting to the slumping Russian auto market all year. The moves have included Volkswagen cutting production by 30,000 units from its factory in Kaluga. Ford also got rid of 950 workers from two plants due to low demand. Some analysts have even speculated that the contracting industry and possibility of lower import duties into the country could cause companies to end their manufacturing in Russia completely.