Immaculate Condition! Low Miles! 3rd Row! on 2040-cars

Auto blog

Production Infiniti QX50 will mostly look like the concept

At this year's Detroit auto show, we got a look at the nearly production-ready Infiniti QX50 concept. Now we get our first look at how close to production the concept was, thanks to new spy photos. The overall shape remains very similar to that of the curvy concept. However, the greenhouse looks taller with more glass. While it isn't quite as low and aggressive-looking, we're sure drivers will appreciate the small compromise for better visibility. At the front, there are more changes that are a little less subtle. The grille looks a bit smaller all around, and even looks a tad lower than the concept. The headlights also don't stretch as far back, and they aren't as narrow either. In the front bumper, the two side scoops of the concept have been significantly toned down, and now look like more traditional grilles that follow the shape of the bumper. The lower grille is more open with just a mesh insert instead of the concept's skidplate-style chrome bar. Moving to the back, we find the taillights look nearly identical to the concept's. They're very long and narrow, and they connect into a metal crease that looks a bit like a spoiler. It looks as the though the faux skidplate treatment on the rear bumper will also make it to production, but the integrated exhaust tips have given way to more conventional round tips in bumper cutouts. It also may have lost the concept's air vents on each side of the hatch. Though they may have also just been toned down enough that they don't show through the camouflage. When the QX50 hits dealers, it will be available with Infiniti's fascinating variable compression four-cylinder making 268 horsepower. The crossover will also feature a version of Nissan's ProPilot semi-autonomous technology, which has been implemented in the Nissan Serena minivan in Japan. We expect to see the fully revealed production model very soon, possibly by the end of the year. Related Video:

About 20k Nissan Pathfinder, Infiniti JX models recalled for potentially faulty brakes

The National Highway Traffic Safety Administration has issued a recall for the 2013 Nissan Pathfinder and 2013 Infiniti JX due to a problem with the front brakes. The problem is a result of the brake torque member (a part that attaches the brake caliper to the front suspension), which was cast improperly with a structural weakness that could possibly lead to "reduced braking, increasing the risk of a crash," according to NHTSA. How, you ask? If the part breaks, the brake caliper could move position and possibly make contact with the wheel.
Around 20,000 of these sister crossovers are being recalled, but it doesn't sound like all were equipped with the faulty component. Dealers will inspect vehicles built between December 3, 2012 and January 29, 2013, and replace components from the defective batch. The recall goes into effect next month, but until then, the official recall notice is posted below with information for how owners can contact Nissan.

Infiniti Q Inspiration Concept shows its face

Update: Infiniti released a second image of its Q Inspiration Concept with a press release about sales. We're not sure why, but we're not complaining and have added it above. The original rear three-quarter image is below in the text. Following a teaser image and some cryptic hints from designers, Infiniti has mostly revealed its concept for the Detroit Auto Show. It's called the Q Inspiration Concept, which for having "inspiration" in the name, is actually a rather uninspired name. But that's OK, because what it lacks in clever naming it makes up for in a beautiful fastback body. When the teaser was released, one of the designers mentioned the car would have a "long cabin," and that's no exaggeration, as the greenhouse reaches nearly to the tail edge of the car. It's a roofline that is highly reminiscent of the Audi A7. And as such, it would make a lot of sense for this Infiniti to be a hatchback, too, especially if it reaches production. We can't say for sure if this concept has a hatch, though, since there are some panel gaps at the base of the D-pillar and the Tesla Model 3-style rear pane of glass suggests this concept is technically a sedan. Unlike the Audi A7, the rest of the Infiniti is as curvy as the roof. There's hardly a crease anywhere, and it looks muscular with the big bulging front and rear fenders that flow effortlessly into each other. The clean exterior is accented by a lack of exterior door handles and what look to be cameras for side mirrors. The contrast to the organic curves comes from the nose and the wheels. The area where the grille would be is more chiselled and aggressive than the rest of the body. The wheels also have hard edges and lots of complicated elements that don't quite fit the organic theme of the rest of the car. Still the car overall is very striking and graceful. The press release continues to emphasize new powertrains, proportions, and the future design direction of Infiniti. As such, we suspect that this car uses, at minimum, a version of Infiniti's variable-compression engine, and more likely features extensive electrification, if not a pure EV powertrain. The lack of a large opening at the front would seem like further evidence the car utilizes electricity at some level. The car will make its full debut on Jan. 15. Related Video: Image Credit: Infiniti Green Detroit Auto Show Infiniti Hatchback Luxury Sedan 2018 detroit auto show