2012 Infiniti M on 2040-cars

Auto blog

Infiniti Q50 steer-by-wire system took 10 years to develop [w/video]

Infiniti's Direct Adaptive Steering (DAS) is quite a novelty - the system employs no physical connection between the steering wheel and the front wheels under normal circumstances and instead relies on a computer, clutch and steering-angle actuator to guide vehicles down the road with input from the driver.
In our First Drive review of a 2014 Infiniti Q50 equipped with the system, we weren't overly impressed by the artificial feedback. But we can't help but be impressed with how long Infiniti spent on its development: a full 10 years, according to Autoline Daily in the video report below. A staggering 70 percent of the research and development time spent on DAS was devoted to getting the steering feel right, and unfortunately, our first impression suggests their results still leave something to be desired, as we found it lacked the sporty feeling a sport sedan should have.
The weight of DAS is comparable to that of a conventional steering system due to its complexity. For example, three ECUs are used in the first-generation DAS system to ensure there's never a loss of steering, but Infiniti is refining the technology and is working to simplify it to reduce weight. One day Infiniti hopes that only one ECU will be needed to control DAS. We just hope it doesn't take the Japanese automaker another ten years to get the steering feel right.

Nissan, Infiniti recall more than 130,000 vehicles for potential fuel leak

Nissan and its luxury brand, Infiniti, are set to recall 133,592 vehicles after discovering that fuel could leak out around the pressure sensor, potentially increasing the chances of a fire. While Nissan lists five nameplates in its recall, there are actually only three models affected by the improperly tightened fuel pressure sensor. They include the 2012 to 2014 Nissan Juke, as well as 2012 to 2015 Infiniti M56/Q70 sedans and QX56/QX80 SUVs. Nissan will begin notifying owners of affected vehicles soon, with the recall expected to officially kick off no later than January 26, 2015. Naturally, repairs will be conducted free of charge. Scroll down for the official bulletin from the National Highway Traffic Safety Administration. And stay tuned for more news coming out of the NHTSA offices today. In addition to Honda's expansion of its recall for vehicles with Takata-built airbag inflators, the regulatory body published a huge number of unrelated recalls this morning, helping to stack the total number of called-back vehicles even higher in these last weeks of 2014. Report Receipt Date: NOV 28, 2014 NHTSA Campaign Number: 14V683000 Component(s): FUEL SYSTEM, GASOLINE Potential Number of Units Affected: 133,592 Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70, and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak. CONSEQUENCE: A fuel leak in the presence of an ignition source could cause a vehicle fire. REMEDY: Nissan will notify owners, and dealers will replace the fuel pressure sensors, as necessary, free of charge. The recall is expected to begin on or before January 26, 2015. Owners may contact Nissan customer service at 1-800-647-7261. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. This is an expansion of recall 12V-069 Featured Gallery 2015 Infiniti QX80 View 26 Photos Related Gallery 2013 Nissan Juke Nismo News Source: National Highway Traffic Safety AdministrationImage Credit: Infiniti, Nissan Recalls Infiniti Nissan Safety Crossover SUV Luxury Sedan infiniti qx80 infiniti m56 infiniti q70

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.