1998 Infiniti J30 on 2040-cars

Auto blog

Infiniti QX50 concept previews production model with variable compression engine

Infiniti revealed its QX50 concept ahead of its official debut at the Detroit Auto Show, and despite the concept title, it looks pretty much production-ready. The company calls the crossover "an evolution of the QX Sport Inspiration" concept, and that's certainly accurate. Side-by-side, the QX Sport, which we already figured was previewing a new QX50, and this concept look nearly identical. The primary changes are bumpers and side skirts that feature the obligatory aluminum trim to look like skid plates, and simple black plastic fender flares. The overall result is a crossover that is pleasant but not exactly exciting that bridges the gap between the small and swoopy QX30 and the large QX60. The plain wrapper hides plenty of impressive technology, though. Under the hood is Infiniti's fascinating variable-compression turbocharged engine. It's a 2.0-liter inline-four that can alter its compression ratio to anything between 8:1 and 14:1. The result is an engine that produces an estimated 268 horsepower and 288 lb-ft of torque. Infiniti says the four-cylinder should be about 27-percent more efficient than a comparable V6. In addition, while the company says this concept just shows a potential application of the engine, it's safe to say that you can expect it in the production model. With the new engine, the QX50 will also switch from to a front-drive platform, with all-wheel drive definitely an option or possibly standard; the current QX50 is based on the aging rear-drive FM platform used on other Infinitis and the Nissan 370Z. The other new tech buried in the QX50 concept's body is what Infiniti calls the "first production-ready incarnation" of its ProPilot semi-autonomous technology. The company doesn't go into great detail about what it will do except for handling stop-and-go highway traffic. We would hazard a guess that the system is functionally the same as the one introduced on the Nissan Serena minivan in Japan. It goes by the same name and can handle stop-and-go traffic, as well as maintain the car's lane position and distance behind other cars. It's another safe bet that we'll see this system in the production model. Other details about the car, such as the interior, have yet to be revealed. We're sure to see it as well as other information about the QX50's technology when it makes its full debut in Detroit. Related Video:

Infiniti QX Inspiration Concept SUV may be the most Japanese thing in Detroit

Infiniti is following up its Q Inspiration Concept from the Detroit Auto Show last year with a QX Inspiration Concept for 2019. Unlike the Q Inspiration from last year ( VC-Turbo engine), this one is fully electric. That said, it does sport a similar design language. This QX concept is meant to preview an upcoming midsize electric Infiniti SUV. Since it's powered by an electric powertrain, there's no need for a grille. Infiniti decided to take the opportunity to spell its name out in big and bold letters across the bow instead. The proportions are obviously concept-car-like with a high beltline and squashed rear-end. Straight lines and muscular curves accentuate the car's stance nearly everywhere you look — somehow we still didn't escape the plastic wheel arches breaking up the pretty white paint and surrounding the 22-inch wheels. Related: Infiniti QX Inspiration fails to drive onstage at Detroit Auto Show reveal Etchings on the razor-thin headlamps and throughout the car are designed to look as though lasers did the work. Infiniti emphasizes that it used Japanese "Ma" styling, which puts an emphasis on negative space. Take a look through the photos yourself to see if you think Infiniti succeeded at utilizing the design mantra of "white space" on this SUV. One neat feature you'll easily be able to decipher on the exterior is the use of Japanese red cedar slats on the roof. You can see straight out of the car from inside, and it offers a bit of contrast color-wise. A lot of the magic is contained in the interior of the QX Inspiration, though. The first thing you'll see is the pillar-to-pillar screen that's finished in gold-tinted glass. Remind anyone of Byton? As if that wasn't enough screen, Infiniti also put a screen in the square steering wheel, too. The center console is made using marble, extending all the way back to the rear seats. White, suede rhombus panels serve as the Infiniti's floor that also features gold inlays. Infiniti takes advantage of the electric car benefit of a flat floor for extra interior space — the battery sits low under it. Infiniti QX Inspiration Concept View 24 Photos It also uses the popular concept-car trick of rotating seats to make ingress and egress easier. The same tech was revered in the 1960s. Infiniti says it intentionally left out any technology from the backseat so as to give the cabin a more natural and authentic appearance in pursuing the Japanese appreciation of nature and craftsmanship.

Infiniti Prototype 10 single-seat speedster unveiled at Pebble Beach

PEBBLE BEACH, Calif. — Infiniti's new Prototype 10 takes inspiration from last year's Prototype 9 concept, but instead of minimal bodywork and open wheels, adopts the long and sinuous profile of classic speedsters of the past. And the concept's electric powertrain hints at the Japanese automaker's future. Infiniti says that all new production models from 2021 onward will have some sort of electrification, spread across pure battery-electric vehicles, parallel hybrids and e-POWER series hybrid powertrains. The overall shape of the Infiniti Prototype 10 recalls classic race cars like the 1950s-era Jaguar C- and D-Types. There's virtually zero wind protection for the single passenger, but there's a prominent headrest that incorporates a fin-shaped aero element. Air intakes are plentiful and festooned with close-set vertical bars that remind us of last year's Prototype 9 concept. There are lots of striking details in the Prototype 10's flowing bodywork. Slim, almost slit-like lights up front sit below the level of an Infiniti logo highlighted by negative space. In profile, a virtual line cuts across the vehicle front to rear. We look forward to seeing how some of these elements are incorporated into future production vehicles from Infiniti. View 17 Photos We don't have any details on what's actually powering the Prototype 10 as its sits, other than the fact that it's electric, of course. But we do know that the concept uses Infiniti's steer-by-wire Direct Adaptive Steering system. We can also see that the interior compartment is minimalist in design, clearly in an effort to keep the driver's focus firmly on the road ahead. Though much of the commentary surrounding the Prototype 10 will undoubtedly be about its radical bodywork, it may be the vehicle's chassis that is most relevant to Infiniti's production electric vehicle plans. The company describes the Prototype 10's chassis as rigid, modular and flexible with a flat floor and says such a platform would underpin its future electrified vehicles, including sedans, SUVs and sportscars. Stay tuned for more on the Infiniti Prototype 10 as we meander the remainder of Monterey Car Week here in California. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.