Leather Moonroof Awd Bose Sound Coupe Factory Warranty Off Lease Only on 2040-cars

Auto blog

Infiniti QX80 refreshed for 2015, range-topping Limited trim added

Alongside the updated Q70, Infiniti has refreshed its fullsize SUV, the QX80, for the 2014 New York Auto Show. Like its freshened sedan, the QX80 is full of incremental styling tweaks typical of a mid-cycle update like this. Also like the Q70, there's a new member of the QX80 family for the 2015 model year.
But first, the overarching changes for the QX80 range. As we said, this is pretty standard fare, with new headlights and taillights and a restyled grille designed to fit the full-sizer in with the most recent Infiniti design language. Full LED headlights, turn signals and fog lights should provide a bit more illumination, while the mesh inserts on the "double-arch" grille remind us of the Q50. Still, this is a rather bulbous, inelegant piece of design in our eyes. Out back, the shape of the taillights has been tweaked, and they now sport LED illumination. The new rear bumper is larger, as well.
In the cabin, upgrades are similarly sparse. There are a few new tech items, like automatic high beams and predictive forward collision warning. Overall, though, this is the same wood-and-leather-lined cabin Infiniti has been selling for the past few years.

Infiniti QX50 confirmed for NY debut

It's been eight years now since Infiniti took the wraps off its smaller crossover. The model initially known as the EX was subsequently renamed the QX50 in the brand's broad nomenclature shakeup a couple of years ago, but now it's received what promises to be a comprehensive makeover to be revealed at the New York Auto Show next week. Though it hasn't given us any photos to go on (that's the current model pictured above), Infiniti has revealed that "the updated QX50 has a wheelbase increase of more than three inches, creating additional rear legroom and interior volume." We're also told to expect "new front and rear fascias, wheels, side sills, as well as a slightly higher ride stance." Nissan's rival to the likes of the BMW X3, Audi Q5, Volvo XC60 et al is offered Stateside with a 3.7-liter V6 driving the rear wheels or all four, but is offered overseas as well with a 3.0-liter turbodiesel. We'd expect the revised model to carry over the same engines, perhaps with some revisions, when it reaches showrooms this fall.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.