Infiniti G35 Sports Coupe 2-door 3.5l on 2040-cars

Auto blog

Nissan recalling GT-R, Infiniti crossovers over steering column issue

Nissan has discovered a problem with the steering column on some of its higher-end all-wheel-drive vehicles from a few years back, and has issued a recall in conjunction with the National Highway Traffic Safety Administration to address the issue. The issue revolves around the outer tube on the steering column, which may not be perfectly round. That would put extra stress on the upper steering bearing, which could cause it to fracture, disabling the car's steering ability and potentially leading to a crash. The problem affects Nissan's flagship GT-R supercar – specifically 2009 models manufactured between March 14, 2007, and April 25, 2008) as well as an array of Infiniti crossovers: namely the 2008 EX35 and the 2008-09 FX35 and FX45. In the case of the luxury crossovers, Infiniti dealers are being instructed to replace just the steering shaft, but Nissan dealers will have to replace the entire steering column assembly on the GT-R. All told, the recall is estimated to encompass 16,973 vehicles across the United States. RECALL Subject : Steering Column Tube may be Out of Round Report Receipt Date: FEB 02, 2015 NHTSA Campaign Number: 15V054000 Component(s): STEERING Potential Number of Units Affected: 16,973 Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008 Infiniti EX35 vehicles manufactured June 29, 2007, to April 25, 2008, 2009 Infiniti FX35 and FX45 vehicles manufactured October 31, 2007, to April 16, 2008, and 2009 Nissan GT-R vehicles manufactured March 14, 2007, to April 25, 2008. The steering column outer tube may not be round, resulting in extra stress being applied to the upper steering bearing. This stress may cause the bearing retainer to fracture, creating extra play in the steering wheel or a possible loss of steering. CONSEQUENCE: Extra play in the steering wheel or a loss of steering may increase the risk of a crash. REMEDY: Nissan will notify owners, and dealers will replace the steering shaft on the Infiniti EX35, FX35, and FX45 vehicles, and will replace the steering column assembly on the Nissan GT-R vehicles, free of charge. The manufacturer has not yet provided a notification schedule. Infiniti owners may contact customer service at 1-800-662-6200. Nissan owners may contact the GT-R hotline at 1-866-668-1487.

Upcoming QX80 will use current model's platform, powertrain

Infiniti previewed the next-gen QX80 full-size SUV at this year's New York Auto Show with the QX80 Monograph concept. The new model is slated to go into production by the end of this year. Despite the updated look, Motor Trend reports that the next QX80 will ride on the same platform as the current model, carrying along with it the 5.6-liter 400 horsepower V8. The current QX80 shares a platform with the Nissan Patrol globally and the Nissan Armada here in the US. The model has been a success for the automaker, outselling every other Infiniti but the smaller QX60 crossover and Q50 sedan. Though the platform dates back to 2010, it seems Infiniti doesn't want to spoil a good thing. Competition like the Mercedes-Benz GLS-class, Cadillac Escalade, and Lexus LX are about as old as the current QX80. While most new models are more refined than their predecessors, Infiniti Motor Company President Roland Krueger says it should drive about the same as the current model. While the V8 will carry over, Krueger didn't rule out the possibility of a smaller turbocharged V6 for the future. Also carrying over will be the independent, self-leveling rear suspension, though neither the QX80 or Armada get some of the Patrol's really good off-road components. Since there isn't much going on beyond the skin, expect a short development cycle and a full debut sometime this fall. Related Video: News Source: Motor Trend Design/Style Infiniti SUV infiniti qx80 infiniti qx80 monograph

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.