Excellent Infiniti G37 6 Speed Sport Loaded. No Reserve on 2040-cars

Auto blog

Infiniti Q60 to pack upwards of 400 horsepower

Infiniti turned heads when it unveiled the Q60 Concept at the Detroit Auto Show last month. While the concept coupe was revealed with a new 3.0-liter twin-turbo V6, the Japanese luxury automaker didn't indicate how much power it would produce. But now we may have our first indication. Speaking with an unidentified source at Infiniti during the Canadian International Auto Show in Toronto, AutoGuide reports that the production Q60 will arrive late in 2016 and pack at least 400 horsepower. A higher-output version of the same engine, however, could produce as much as 450 hp. That would still be significantly less than the Q50 Eau Rouge, which packed the larger 3.8-liter twin-turbo V6 from the Nissan GT-R with 560 hp. It would put it right on pace with the likes of the BMW M4 (with 425 hp) and perhaps more importantly, the Lexus RC F (with 450 hp). Related Video:

Final Recap: Days 2 and 3 notes, quotes, and takeaways from the US Grand Prix

The Texas grass no longer rustles with 2.4-liter V8 exhaust blown at 18,000 revs, the Texas dust is no longer raised by hard-compound Pirellis. We saw a lot and learned a lot while we were there as guests of Infiniti, and after our Day 1 and race recaps, here are the bits left over from our time spent with the carmaker and Red Bull Racing, including thoughts on a "wicked" race, Christian Horner's quest for a more level playing field, Infiniti "going longer and deeper," and why Mario Andretti should get a police escort at the beginning of a race but not a microphone at the end...

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.