Conv Sport Certified Manual Convertible 3.7l Alloy Rims High Performance Tires on 2040-cars

Auto blog

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.

2023 Japan Mobility Show Mega Photo Gallery: All the highlights and reveals from Tokyo

The 2023 Japan Mobility Show managed to serve up a surprise heap of exciting and futuristic designs and production reveals. Our staff was on the ground in Tokyo for this year's show, where we captured not just all of the latest automotive trends, but some genuinely weird and fascinating stuff.  Browse: Some Delightful Oddities of the 2023 Japan Mobility Show But on to the cars. This year's show featured introductions from Daihatsu, Honda, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki and Toyota. Some are weird; some are wild; most are probably destined to change significantly before production or merely fade into the void with the rest of the industry's vaporware, but if even a few of these make it to showrooms, we'll consider it a win. Scroll on down for our live galleries of each of the show's major debuts (and cars we're only now seeing in person for the first time). Enjoy!   BMW X2 and iX2 BMW X2 View 6 Photos   Daihatsu me:MO Concept Daihatsu me:MO concept View 14 Photos   Daihatsu Vision Copen Concept Daihatsu Vision Copen View 7 Photos   Daihatsu Osanpo Concept Daihatsu Osanpo View 6 Photos   Daihatsu Uniform Concept Daihatsu Uniform concept View 6 Photos   Honda Prelude Concept Honda Prelude concept View 5 Photos   Honda Sustania-C and Pocket Concepts Honda Sustania-C and Pocket Concept View 8 Photos   Honda CI-MEV Concept Honda CI-MEV View 3 Photos   Infiniti Vision Qe Concept Infiniti Qe concept View 14 Photos   Lexus LF-ZC Lexus LF-ZC View 8 Photos   Lexus LF-ZL Lexus LF-ZL View 10 Photos   Mazda Iconic SP Mazda Iconic SP concept View 8 Photos   Mitsubishi D:X Concept Mitsubishi D:X Concept View 8 Photos   Nissan Hyper Force Concept Nissan Hyper Force concept View 11 Photos   Nissan Hyper Tourer Concept Nissan Hyper Tourer concept View 6 Photos   Nissan Hyper Punk Concept IMG_6533 copy View 8 Photos   Subaru Sport Mobility Concept Subaru Sport Mobility Concept View 7 Photos   Suzuki Swift Suzuki Swift View 5 Photos   Suzuki eWX Suzuki eWX Concept View 3 Photos   Suzuki eVX Suzuki eVX concept View 4 Photos   Toyota Land Cruiser Se Concept Toyota Land Cruiser Se concept View 4 Photos   Toyota FT-3e Concept Toyota FT-3e View 6 Photos   Toyota FT-Se Concept Toyota FT-Se View 7 Photos     Tokyo Motor Show Honda Infiniti Lexus Mazda Mitsubishi Nissan Subaru Suzuki Toyota

Nissan recalling GT-R, Infiniti crossovers over steering column issue

Nissan has discovered a problem with the steering column on some of its higher-end all-wheel-drive vehicles from a few years back, and has issued a recall in conjunction with the National Highway Traffic Safety Administration to address the issue. The issue revolves around the outer tube on the steering column, which may not be perfectly round. That would put extra stress on the upper steering bearing, which could cause it to fracture, disabling the car's steering ability and potentially leading to a crash. The problem affects Nissan's flagship GT-R supercar – specifically 2009 models manufactured between March 14, 2007, and April 25, 2008) as well as an array of Infiniti crossovers: namely the 2008 EX35 and the 2008-09 FX35 and FX45. In the case of the luxury crossovers, Infiniti dealers are being instructed to replace just the steering shaft, but Nissan dealers will have to replace the entire steering column assembly on the GT-R. All told, the recall is estimated to encompass 16,973 vehicles across the United States. RECALL Subject : Steering Column Tube may be Out of Round Report Receipt Date: FEB 02, 2015 NHTSA Campaign Number: 15V054000 Component(s): STEERING Potential Number of Units Affected: 16,973 Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008 Infiniti EX35 vehicles manufactured June 29, 2007, to April 25, 2008, 2009 Infiniti FX35 and FX45 vehicles manufactured October 31, 2007, to April 16, 2008, and 2009 Nissan GT-R vehicles manufactured March 14, 2007, to April 25, 2008. The steering column outer tube may not be round, resulting in extra stress being applied to the upper steering bearing. This stress may cause the bearing retainer to fracture, creating extra play in the steering wheel or a possible loss of steering. CONSEQUENCE: Extra play in the steering wheel or a loss of steering may increase the risk of a crash. REMEDY: Nissan will notify owners, and dealers will replace the steering shaft on the Infiniti EX35, FX35, and FX45 vehicles, and will replace the steering column assembly on the Nissan GT-R vehicles, free of charge. The manufacturer has not yet provided a notification schedule. Infiniti owners may contact customer service at 1-800-662-6200. Nissan owners may contact the GT-R hotline at 1-866-668-1487.