2010 G37xs on 2040-cars

Auto blog

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Infiniti Q50 Eau Rouge running prototype driven by Sebastian Vettel

Infiniti's high-performance Q50 Eau Rouge concept might be one of the biggest teases in the current automotive world. It was first shown at the 2014 Detroit Auto Show as a body without an engine. Then, the sports sedan arrived at the Geneva Motor Show with a modified version of the turbocharged V6 from the GT-R under the hood, tuned to 560 horsepower and 443 pound-feet of torque, and with all-wheel drive. However, it was still just a concept. Finally, the Japanese luxury automaker is showing us what the Eau Rouge can do on the road - briefly.
The company brought reigning Formula One champ Sebastian Vettel along to get behind the wheel, for this all-too-short video from the Millbrook Proving Ground in the UK. There's more good news too. While Infiniti isn't saying that it's definitely going to build the Eau Rouge, it is "pressing ahead with the evaluation." More info about these tests will be released at the 2014 Beijing Auto Show at the end of April. Scroll down to watch Vettel drive the Q50 Eau Rouge and read a little more about it.

Massive Airbag Recall Affects Seven Automakers

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a role in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time. BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall. Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands In most cases, only models in certain high-humidity regions were affected because the NHTSA found that moisture played a roll in determining if there would be a problem. Ford is recalling an estimated 58,669 cars that include the 2005-2006 model years of the Ford GT for the driver and passenger inflators, the 2007-2007 model years of the Mustang for the driver side and 2004 Ranger for the passenger side. It covers vehicles originally sold or currently registered in, wait for it... Florida, Puerto Rico, Hawaii and the US Virgin Islands. Honda is issuing three separate recalls regarding the problem. First, the company is recalling the 2002-2003 model years Civic, CR-V and Odyssey and the 2003 model year of the Accord, Element, Pilot and Acura MDX to replace the passenger's side inflator. This covers all models nationwide. Second, Honda is repairing the passenger's side airbag inflator in the 2003-2005 Accord, Civic, CR-V, Element, Pilot, the 2003-2004 model year versions of the Odyssey, the 2003-2005 model year Acura MDX and 2005 Acura RL. However, only for vehicles located in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico and the US Virgin Islands. Owners will be notified in July. Finally, Honda is separately replacing some models' driver's side inflators.