2006 Used 3.5l V6 24v Automatic Awd Sedan Premium on 2040-cars

Auto blog

Infiniti's variable compression engine in the 2019 QX50 is the first of its kind

The world's first variable compression ratio engine is here, in a production car. That car is the 2019 Infiniti QX50, debuting this week at the Los Angeles Auto Show. The midsize crossover has seen a refresh that has brought it an all-new platform together with new driver assist features, but it's the engine that's the centerpiece here. Nearly everything is continuously variable under the hood of the QX50 – not only the new shift-by-wire XTRONIC CVT. The new VC-Turbo gasoline engine is able to change its compression ratio from 8:1 to 14:1, or anything in between depending of the driving situation; whether there is need for top-end power or turbodiesel-like torque from low revs, or optimized fuel economy. The pistons' reach is continuously adjusted by an electric "Harmonic Drive" motor, which controls a multi-link system, affecting the top-dead-center of the pistons and changing the compression. The engine can also switch between efficiency-maximizing Atkinson cycle and regular combustion cycle, on the go – and there's both multipoint injection and gasoline direct injection employed. The result is 268 horsepower at 5,600 rpm and 280 pound-feet of torque at 4,400 rpm; good figures for a 2.0-liter four-cylinder gasoline engine with a single-scroll turbocharger. Infiniti says that the FWD version's fuel economy of 27 miles per gallon combined is 35-percent better than the previous-generation V6 engine; in AWD guise, it reaches 26 mpg, which is a 30-percent improvement. The new engine is pretty much all-aluminum, but the vaguely magical-sounding "transformative multi-link components" behind the variable compression system are made from high-carbon steel alloy. The engine's multi-link system also enables it to do away with any balancing shafts, and Infiniti compares its smoothness to a V6 rather than a regular four-cylinder. In addition to the aforementioned tech, the VC-Turbo engine has the world's first active engine mount vibration damping system to smoothen its operation even further. Related Video:

2022 Infiniti QX60 spied running around post-Monograph Concept reveal

Infiniti recently revealed the QX60 Monograph Concept, a concept crossover meant to preview the next generation QX60. Today, the first spy shots of the QX60 in production form hit our desks. There’s a whole lot we canÂ’t see under the camouflage, but it looks fairly representative of what we expect a production version of the Monograph Concept would look like. The headlights, grille design, lower opening and side air intakes all look like they were pulled straight off the concept. It also has the same hood design with raised outer edges that lead right into the A-pillar. Its droopy side camouflage does a good job of disguising its curvaceous profile and pronounced rear fenders. We can see a hint of widening at the rear fenders, and we hope that the MonographÂ’s look is translated over to production there. The mirrors were moved further down onto the doors, and the flush door handles are done away with. This tester appears much less flamboyant with normal-size wheels replacing the giant and dramatic spinners on the Concept (gallery of the concept below). Infiniti QX60 Monograph View 36 Photos Infiniti is copying the shape of the rear over to production. We can clearly make out the raked rear window, overhanging spoiler and rounded shape of the back end. The taillights are a bit difficult to see, but their general design matches up to the Concept. As for the fancy chromed exhaust area on the concept, those spots appear flat and barren on this preproduction model. ItÂ’s still heavily covered in camo, though, so we donÂ’t yet know what the rear bumper design will look like in its final form. The production QX60 is set to be revealed next year where it will likely go on sale as a 2022 model year car. ItÂ’s unclear what powertrain(s) will be lurking under the hood, but at least we know the production version wonÂ’t stray terribly far from the concept now. Related Video:

Infiniti boss ices plan for EV

Infiniti President Johan de Nysschen has postponed plans for an electric vehicle in order to focus on high-volume models. Automotive News reports de Nysschen is attempting to be realistic about Nissan CEO Carlos Ghosn's goal of nearly tripling Infiniti global sales from 170,000 units last year to 500,000 by March 31, 2017, saying, "500,000 cars by 2017 is an inordinately ambitious challenge." An electric vehicle would likely sell in rather small numbers.
Still, the executive is already making moves to improve Infiniti sales worldwide with new production in both China and England. Meanwhile, the company plans to unveil a new volume compact sedan set to bow in 2015. Meanwhile, de Nysschen is also working on two new models above the company's current M line. Those will borrow styling cues from machines like the Essence Concept, but will be far less exotic, tilting more toward high-performance luxury than true sports car.