2005 Infiniti G35 X Awd, Low Miles, Fully Loaded, No Reserve on 2040-cars

Auto blog

Infiniti Q60 Project Black S packs F1-derived hybrid twin-turbo V6

At the 2017 Geneva Motor Show, Infiniti unveiled the Project Black S, a souped-up version of the Q60 coupe that packed technology derived from the Renault Sport Formula 1 Team's race cars. Details were scarce. Aside from some F1-inspired bodywork, all we knew was that the twin-turbo V6 would be paired with a kinetic energy recovery system, or KERS for short. At next week's Paris Motor Show, Infiniti is bringing a new concept that's a bit more polished as well as some additional details about what rests under the hood. The car is still dubbed the Infiniti Project Black S. The car still packs a twin-turbocharged 3.0-liter V6 paired with an energy recovery system. Infiniti claims the car makes 563 horsepower, up from 400 in the Q60 Red Sport 400. The Project Black S should hit 60 mph in fewer than four seconds. The powertrain uses three motor generator units (MGU) and a single MGU-K that harvests brake energy. Two electric turbochargers harvest heat energy from the exhaust, meaning the car can gain energy both under braking and acceleration. Visually, there's not much that's changed from last year's Geneva concept. We only have one new photo, but to our eyes the only difference is a few yellow accents on the front bumper. We'll have to wait until next week's reveal for more photos. Related Video:

Infiniti QX50 concept previews production model with variable compression engine

Infiniti revealed its QX50 concept ahead of its official debut at the Detroit Auto Show, and despite the concept title, it looks pretty much production-ready. The company calls the crossover "an evolution of the QX Sport Inspiration" concept, and that's certainly accurate. Side-by-side, the QX Sport, which we already figured was previewing a new QX50, and this concept look nearly identical. The primary changes are bumpers and side skirts that feature the obligatory aluminum trim to look like skid plates, and simple black plastic fender flares. The overall result is a crossover that is pleasant but not exactly exciting that bridges the gap between the small and swoopy QX30 and the large QX60. The plain wrapper hides plenty of impressive technology, though. Under the hood is Infiniti's fascinating variable-compression turbocharged engine. It's a 2.0-liter inline-four that can alter its compression ratio to anything between 8:1 and 14:1. The result is an engine that produces an estimated 268 horsepower and 288 lb-ft of torque. Infiniti says the four-cylinder should be about 27-percent more efficient than a comparable V6. In addition, while the company says this concept just shows a potential application of the engine, it's safe to say that you can expect it in the production model. With the new engine, the QX50 will also switch from to a front-drive platform, with all-wheel drive definitely an option or possibly standard; the current QX50 is based on the aging rear-drive FM platform used on other Infinitis and the Nissan 370Z. The other new tech buried in the QX50 concept's body is what Infiniti calls the "first production-ready incarnation" of its ProPilot semi-autonomous technology. The company doesn't go into great detail about what it will do except for handling stop-and-go highway traffic. We would hazard a guess that the system is functionally the same as the one introduced on the Nissan Serena minivan in Japan. It goes by the same name and can handle stop-and-go traffic, as well as maintain the car's lane position and distance behind other cars. It's another safe bet that we'll see this system in the production model. Other details about the car, such as the interior, have yet to be revealed. We're sure to see it as well as other information about the QX50's technology when it makes its full debut in Detroit. Related Video:

Infiniti QX30 Concept teased ahead of Geneva reveal

Nearly a year and a half after Infiniti unveiled the first Q30 Concept at the 2013 Frankfurt Motor Show, the company is preparing to unveil a high-riding version of the concept, wearing the QX30 moniker, ahead of next month's Geneva Motor Show. While we've yet to receive any details on what to expect of the new QX30 Concept, Infiniti has issued a single teaser image of the car's shapely backside, revealing a pair of trapezoidal exhausts that have been integrated into the rear bumper. That bumper sits particularly high to accommodate what looks to be a small hatch with a prominent space between the slim ribbons of the LED taillights. Similarities to the Q30 hatch, meanwhile, are obvious. The taillights are similarly shaped, as is the tailgate and the integration of the dual exhausts (although they are shaped differently on the QX30). Of course, as soon as Infiniti bothers to release the full and complete details for its upcoming concept, we'll be sure to relay those on to you. Until then, have a peek at both the Q30 and the QX30 and let us know what you think in Comments. Infiniti gears up for premiere of QX30 Concept in Geneva Hong Kong – Infiniti will take the covers off the QX30 Concept at the Geneva International Motor Show next month. The QX30 Concept is the Infiniti design vision which will inspire a new premium compact crossover targeted at a new generation of premium customers. Set to be revealed at Infiniti's press conference, scheduled for 14:30 on 3 March in Geneva, the QX30 Concept aims to reignite the premium compact segment with a distinctive approach to design that looks beyond the practicality and conformity expected of the segment. The potential customers for such a concept are searching for a product to suit their 'urban week and get-away weekend' lifestyle and the QX30's compact footprint matches that. Combining the sleek lines of a coupe with the rugged looks and commanding seating position of a crossover, the QX30 Concept foreshadows an urban explorer which is equally at home in the city as it is on the open road.