2005 Infiniti G35 Sedan Sunroof Leather Alloys 1 Owner 57k Miles Clean Carfax ! on 2040-cars

Auto blog

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Infiniti spruces up the Q50 for 2018

Though overshadowed by the literally larger QX80 Monograph SUV concept, Infiniti's revised 2018 Q50 still made an appearance at the stand in New York. It joins a long list of cars including the Acura TLX, Hyundai Sonata, Mitsubishi Outlander Sport, VW Golf, and Toyota Sienna and Yaris that all went under the knife for the show. The Infiniti Q50's update may be one of the most mild, though, as it only consisted of cosmetic changes. Up front, the grille has been enlarged and given more prominent swoops at each corner. On the S version, sharp creases appear on either side of the primary grille and descend down to the lower, center grille. The outboard grilles of the front bumper have changed shape, too, and they now feature contrasting black plastic trim. The standard Q50 has a new bumper, as well, and though less aggressive than the S version, it still looks sporty with a more pronounced chin spoiler. Both iterations of the 2018 Q50 share the same tail end. The main change is in the rear bumper. A center diffuser has now appeared at the base. The contour of the diffuser is echoed by two creases in the bumper at progressively higher points. On the S model, the panel between the diffuser and the first crease is painted black, and the diffuser is painted in the body color. The standard model's entire bumper is painted in body color, and the diffuser looks to be a more muted black or gray. Inside, even fewer changes have been made. A new steering wheel with reshaped thumb grips is now included. Infiniti also added new stitching to the instrument panel cover and leather shift knob. You'll be able to examine all of these changes up close at an Infiniti dealer this summer when the cars arrive. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Infiniti QX55 spied for the first time looking sleek

The Infiniti QX55 is well on its way to joining the crossover coupe ranks in 2020, and here’s our first view of the car out testing. Infiniti is expected to debut the ‘ute in the first half of 2020, so it wonÂ’t be long till we see it without the swirls and body cladding on it, too. As the name suggests, the QX55 is a derivative of the QX50 crossover, which was just completely redesigned for the 2019 model year. Infiniti debuted its new VC-Turbo (variable compression) engine technology in that crossover, and itÂ’ll certainly be along for the ride in the QX55 as well. The latest teaser suggested that Infiniti would be greatly differentiating this crossover coupe to the rest of the field by giving it a uniquely long tail for more cargo space. That tail still exists on the vehicle caught out testing, but it doesnÂ’t look drastically different than other vehicles of its ilk. To that end, rear cargo space is likely to be slightly down from the more traditionally shaped QX50, even if itÂ’s slightly better than competitors. However, rear seat space appears to be better than expected. The roof itself doesnÂ’t taper at a horribly steep angle into the rear passengerÂ’s heads, and the rear windows are large enough that they may only cause minor claustrophobia. Most of everything except for the rear end will likely resemble the QX50 verbatim, so itÂ’s just the back half that weÂ’re waiting for in the reveal. The grille itself has the same waveform shape as the normal QX50, and the body creases in the hood and doors protruding through the skin-tight camo resemble it as well. Even the wheels on this tester are exactly the same design as the rollers used on the production QX50. When it does come out, the QX55 will join its German competition in this stylish but utility-hampered segment. The BMW X4 and Mercedes-Benz GLC Coupe will be the main targets when we expect this car to hit dealer lots later this year. Related Video: