2008 Infiniti on 2040-cars

Auto blog

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.

This is the 2017 Infiniti Q60 Coupe totally exposed

Right about now, Infiniti's holiday card to Autoblog is going to get "lost in the mail." That's because we're going to spoil the automaker's next big debut nearly two full months ahead of schedule. Oops. What you see above comes from a promotional shoot for the new Q60 coupe. The photos taken here will probably serve as the official images when the new coupe bows in January at the 2016 Detroit Auto Show. The look is more or less what we expect, serving as a literal translation of the Q60 coupe concept that debuted last year in Detroit. That means it's darn handsome. The front fascia is bold, with Infiniti's trademark grille dominating the nose. As we predicted in our most recent round of spy photos, the Formula One-inspired front bumper has been ditched in favor of a more conventional unit, likely owing to Infiniti parent Renault-Nissan's pending divorce from the Red Bull Racing team. This is not a bad thing. There was just too much Mercedes-Benz SLK in the concept's front bumper. The pert tail features a remarkably short deck and an aggressive roofline, although we aren't sure how the company's heavily kinked beltline works on a two-door model. The profile is also highlighted by a set of vents just aft of the front axle. Overall, we're finding the new Q60 coupe to be a worthwhile alternative to the BMW 4 Series, Audi A5, Lexus RC, and the upcoming Mercedes C-Class coupe in terms of aesthetics. As previously reported, the most powerful Q60, likely featured here, will be offered with a 3.0-liter, twin-turbocharged, 400-horsepower V6. A 2.0-liter turbo pilfered from Mercedes will serve as the base engine. As for the cabin, we unfortunately don't have much to show you (we need to leave something for Infiniti to show in Detroit, right?). We can tell you that the overall cabin should be reminiscent of the Q50 sedan, and the Q60 isn't likely going to depart much from the controls and infotainment on its four-door sibling. Related Video: