Find or Sell Used Cars, Trucks, and SUVs in USA

2010 Infiniti Ex35 Damadge Repairable Rebuilder Only 73k Miles Runs!!!! on 2040-cars

US $11,900.00
Year:2010 Mileage:73936 Color: White /
 Black
Location:

Salt Lake City, Utah, United States

Salt Lake City, Utah, United States
Advertising:
Transmission:Automatic
Body Type:SUV
Engine:V6 Cylinder Engine
Vehicle Title:Salvage
Fuel Type:Gasoline
For Sale By:Dealer
VIN: JN1AJ0HP4AM700149 Year: 2010
Number of Cylinders: 6
Make: Infiniti
Model: EX
Trim: EX35
Warranty: Unspecified
Drive Type: 2WD
Mileage: 73,936
Exterior Color: White
Disability Equipped: No
Interior Color: Black
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

We are pleased to offer this 2010 Infiniti EX35  that is damaged (please take a look at pictures for current damage), this Infiniti  is priced to sell and does run in lot, which means it can be driven on to a transport truck or trailer since it is currently damaged!. We can offer Domestic and International shipping arrangements, please take a look at the pictures for more details and don't pass up the opportunity to own this builder for a fraction of the price as the listing can be ended any second due to local buyers!!!! 


                                                           THIS VEHICLE IS TO BE PICKED UP FROM COMPTON CALIFORNIA 431 EAST BANNING STREET COMPTON CA
 CALIFORNIA LOCATION - STORAGE ONLY
                   ALL SALES THROUGH  UTAH DEALER

 This vehicle is being sold as is ,where is with no warranty of any kind. We are a bonded dealer and do have to do all necessarily documents so charge 150 dollars document fee on each and every vehicle. This vehicle is located in Los Angeles,CA,90222 we can arrange shipping anywhere in the world!!

IF YOU HAVE ANY QUESTIONS PLEASE CALL 310-703-4199(Before you call or email please read Faq's below)  or email us at salvagecar@yahoo.com!!!!!!

PLEASE TAKE A LOOK AT ALL THE PICTURES THAT ARE PROVIDED AS EVERYONE REPAIRS IN DIFFERENT WAYS,SO IT IS UP TO YOU ON WHAT YOU WOULD REPLACE OR REPAIR ON THE VEHICLE. THE PICTURES ON THE WEBSITE ARE ALL THE PICTURES WE HAVE AND IF FOR ANY REASON YOU NEED ADDITIONAL PICTURES PLEASE SEND A INSPECTOR OR COME INSPECT THE VEHICLE,AS WE DO NOT HAVE ANY REPAIR ESTIMATES. WE ALSO DO NOT SELL PARTS OFF THE VEHICLES THAT ARE REBUILDERS , AS ONE OF THE LEADERS IN THE SALVAGE INDUSTRY WE TRY AND PRICE ALL OUT VEHICLE'S RIGHT TO NOT PLAY AROUND IN THE PRICE,SO IF YOU HAVE A LOW BALL OFFER DO NOT BOTHER AS WE TRY TO PRICE OUR VEHICLES RIGHT. WE HAVE A VERY HIGH CALL VOLUME ON ABOVE QUESTIONS , SO THANK YOU VERY MUCH FOR TAKING THE TIME TO READ THIS BRIEF DISCLOSURE AND GOOD LUCK ON YOUR BUILDER!!

 Payment Details

-Deposit Due within 12 hours of buy now

-Final Payment due within 5 days

-pickup required within 5 days from payment

-NO FINANCING OR TRADE IN WHAT SO EVER.

 

NEW BUSINESS HOURS

Monday - Friday: 8:00 am - 5:00 pm

 Saturday - Sunday-CLOSED

Infiniti EX for Sale

Auto Services in Utah

Westech Equipment ★★★★★

Automobile Parts & Supplies, Industrial Equipment & Supplies, Generators
Address: 195 W 3900 S, Bingham-Canyon
Phone: (855) 769-1763

Tony Divino Toyota ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 777 W Riverdale Rd, Mountain-Green
Phone: (855) 634-0095

Tony Divino Toyota ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 777 W Riverdale Rd, South-Weber
Phone: (855) 634-0095

Secor Motors Inc ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 5765 S 1900 W, Roy
Phone: (801) 825-1423

Rogers Automotive ★★★★★

Auto Repair & Service, Clutches, Brake Repair
Address: 198 W State St, Saratoga-Springs
Phone: (801) 768-2590

Leavitt Automotive of Saint George ★★★★★

Auto Repair & Service, Auto Transmission, Automobile Air Conditioning Equipment-Service & Repair
Address: 1826 W 5400 N, Ivins
Phone: (435) 680-2328

Auto blog

Infiniti's new VC-T changes the rules of small turbocharged engines

Sun, Aug 14 2016

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.

Infiniti puts EV plans on hold again

Thu, Jan 22 2015

Think of it as the green-automotive industry's version of Groundhog Day. Nissan's Infiniti division is putting plans for its first mass-production electric vehicle on hold. Again. The Infiniti LE, whose concept version was unveiled 2012's New York Auto Show, is again being put up on the proverbial blocks, USA Today says, citing a presentation by Infiniti executive Michael Bartsch at a recent company event in Detroit. Essentially, the Nissan division has bigger fish to fry, in the form of boosting overall Infiniti sales, and doesn't yet want to put the effort into introducing the Infiniti LE. The Infiniti EV plans were first postponed by then-Infiniti President Johan de Nysschen during the summer of 2013, as de Nysschen wasn't quite buying into Nissan boss Carlos Ghosn's ambitious electric vehicle sales projections. De Nysschen resigned last summer to join General Motors' Cadillac division. One issue may be the fact that the Infiniti wouldn't be all that different from the Nissan Leaf. Despite the fact that US sales of that EV surged 34 percent last year compared to 2013, to 30,200 vehicles, an Infiniti version was apparently not enough of a selling point within the company. While the Infiniti is sportier looking than the Leaf and would boast inductive, wireless charging, it would have a similar power output and single-charge range as the Leaf.

Daimler and Nissan to build luxury cars at new plant in Mexico

Thu, 05 Sep 2013

A few years back, when Daimler was looking for a partner to spread the cost of development of small cars, it agreed to collaborate with Nissan on future products, such as vehicle platforms and drivetrains. The latest development in the collaboration concerns the assembly of small luxury cars for Infiniti and Mercedes-Benz at a Nissan plant in Mexico, two unnamed sources told Reuters.
The plant in question, Aguascalientes, is a $2 billion project that will open later this year next to an existing Nissan factory. The upcoming Infiniti Q30 four-door hatchback is expected to be built there, possibly alongside the Mercedes GLA-Class, which is one of several candidates Mercedes is considering to build at this facility, Reuters reports. The GLA will debut at the Frankfurt Motor Show this month, and initial production of the model will take place in Germany. The Q30 could follow a similar path, with assembly starting at Nissan's Sunderland plant in the UK, and then expanding to Aguascalientes later on.
The underlying platform of the Q30 and GLA, codenamed New Generation Compact Car (NGCC), was developed by Daimler. The Q30 would be the first Infiniti produced under the automakers' agreement. Last year, Nissan agreed to make engines that would find their way into Mercedes and Infiniti vehicles.