2014 Hyundai Veloster on 2040-cars

Auto blog

Human waste can be reused as hydrogen for Hyundai Tucson FCEV

Here's the recipe: separate the water out of some sewage, leaving the biosolids behind. Then pipe those solids into airless tanks and let some microbes go to town. These bugs release a gas (roughly 60 percent methane, 40 percent CO2) which you can burn to power the plant where you're doing all this work but remember to send some of the methane to a tri-generation machine that leaves you with electricity, heat and hydrogen. It might sound a bit complicated, but this process is working in prototype form at the Orange County Sanitation District's Fountain Valley waste facility in California, and hydrogen car drivers in the area - including those of the upcoming Hyundai Tucson Fuel Cell CUV - can even power their rides from the end product. UC Irvine's National Fuel Cell Research Center's Jack Brouwer developed the process and he says reusing waste to move cars, "smells like money." Hyundai will soon start leasing the H2 CUV for $499 a month ($2,999 down) for 36 months, including free hydrogen refueling and Hyundai's Valet Maintenance. The Korean automaker says it has had a surprising number of people express an interest in the vehicle. We wonder if a waste-powered hydrogen station will make fuel cell technology more or less appealing. Read more details over at the Korea Herald. Featured Gallery 2015 Hyundai Tucson Fuel Cell: LA 2013 View 19 Photos News Source: Korea Herald Green Hyundai Technology Emerging Technologies Hydrogen Cars tucson

US expands probe into ZF-TRW airbag failure-to-deploy to 12.3 million vehicles

DETROIT — U.S. auto safety regulators have expanded an investigation into malfunctioning airbag controls to include 12.3 million vehicles because the bags may not inflate in a crash. The problem could be responsible for as many as eight deaths. Vehicles made by Toyota, Honda, Kia, Hyundai, Mitsubishi and Fiat Chrysler from the 2010 through 2019 model years are included in the probe, which was revealed Tuesday in documents posted by the National Highway Traffic Safety Administration. It involves airbag control units made by ZF-TRW that were installed in the vehicles. The control units can fail in a crash, possibly because of unwanted electrical signals produced by the crash itself that can disable an air bag control circuit housed in the passenger compartment, according to NHTSA documents. The electrical signals can damage the control circuit, the documents say. ZF, a German auto parts maker which acquired TRW Automotive in 2015, said in a statement that it's committed to safety and is cooperating with NHTSA and automakers in the investigation. The case is another in a long list of problems with auto industry airbags, including faulty and potentially deadly Takata airbag inflators. At least 24 people have been killed worldwide and more than 200 injured by the inflators, which can explode with too much force and hurl dangerous shrapnel into the passenger cabin. The inflators touched off the largest series of automotive recalls in U.S. history involving with as many as 70 million inflators to be recalled by the end of next year. About 100 million inflators are to be recalled worldwide. On April 19, NHTSA upgraded the ZF-TRW probe from a preliminary evaluation to an engineering analysis, which is a step closer toward seeking recalls. So far, only Hyundai and Kia and Fiat Chrysler have issued recalls in the case. Four deaths that may have been caused by the problem were reported in Hyundai-Kia vehicles and three in Fiat Chrysler automobiles. NHTSA opened an investigation in March of 2017 involving the TRW parts in Hyundais and Kias. The upgrade came after investigators found two recent serious crashes involving 2018 and 2019 Toyota Corollas in which the airbags did not inflate. One person was killed. Jason Levine, executive director of the Center for Auto Safety, a nonprofit consumer group, said the ZF-TRW case shows the auto industry thus far has learned very little from Takata.

Hyundai and Kia to update EV brake lights; our tests show how they currently may not come on

Update: This article has been updated to reflect Kia's own service campaign announcement.  Hyundai will be launching a "field service campaign to update the EV brake light logic" on its Ioniq 5 as well as the Genesis GV60, Electrified GV70 and Electrified GV80. According to Hyundai's director of communications, Michael Stewart, the change will be make to new production vehicles and as part of free-of-charge service campaign that will launch in July for approximately 56,000 vehicles already on the road.  "Regardless of the accelerator pedal input, the brake lights will now turn on when the deceleration rate exceeds approximately 0.13 G," Stewart wrote in an e-mail to Autoblog. Since this article was originally published, Kia has announced it will be performing the same update to its EV6 and Niro EV. Kia is also part of the Hyundai Group. This change would seem to be in keeping with the behavior we have experienced in the Hyundai Ioniq 6, the firm's most recently introduced EV. We go into that behavior lower in this article.  This announcement comes in the wake of owner complaints as well as a test by Consumer Reports that found that most Hyundai, Genesis and Kia electric vehicles can come to a stop without their brake lights illuminating. This occurred when using those vehicles' most aggressive "i-Pedal" function that allows for so-called "one-pedal driving" where the driver can mostly rely upon the car's regenerative braking system (which is used to replenish the battery pack) to stop the car.  We tested this for ourselves this week as we are currently testing a Genesis Electrified GV70, and I personally own a 2023 Kia Niro EV Wave. I almost exclusively drive in i-Pedal mode. News Editor Joel Stocksdale tested the Hyundai Ioniq 6 in Michigan, and again, we will address his findings after the Genesis and Kia as they are completely different. I attached an action camera to the rear of each car and conducted the same test in both: Accelerate to 40 mph and come to a stop without touching the brake and, crucially, without lifting my foot fully off the throttle. The result as you can see below with the Niro is that the brake lights do not come on until around 3 mph when I fully lifted off the throttle and bring the car to a full stop. I could not bring the car to a full stop without fully lifting off the throttle.