2010 Hummer H3t Base Crew Cab Pickup 4-door 3.7l on 2040-cars

Auto blog

GMC Hummer EV will weigh 9,046 pounds

In the 2000s, Hummer's unique breed of off-roaders summoned a dark cloud of disapproval from environmentalists because they were gas-guzzling SUVs with mammoth dimensions. GMC's born-again Hummer EV will escape the gas guzzler label by running solely on electricity, but it will be even bigger and much heavier than its predecessors. Enthusiast site GM-Trucks reported the Hummer EV will tip the scale at 9,046 pounds (4,103 kilos if you're outside of the United States) in its quickest configuration, and a GMC spokesperson told Autoblog that figure is accurate. For context, the H1 Alpha released for 2006 (and often considered the ultimate Hummer) weighed 8,113 pounds, the H2 checked in at 6,614 pounds with the 6.2-liter V8, and the H3 was comparatively light at 4,600 pounds. When it lands, the Hummer EV will be one of the heaviest new cars sold in the United States. Part of its plumpness can be attributed to its colossal dimensions; it measures 216.8 inches long, 86.7 inches wide, and 81.1 inches tall. In comparison, the H1 stretched 185 inches long, 87 inches wide, and about 78 inches tall. The electric powertrain also played a major role in slinging the Hummer's weight into dually pickup territory. Batteries are heavy, and the Hummer EV's Ultium pack reportedly has a capacity of over 200 kilowatt hours. It has three electric motors, too. Note the 9,046-pound figure applies only to the sold-out Launch Edition model, which will offer 1,000 horsepower, the aforementioned 200-kilowatt battery, and the supercar-like ability to hit 60 mph from a stop in three seconds. GMC will launch cheaper, slower, and presumably considerably lighter variants of the truck in the early 2020s. Although SUVs are often heavier than comparable trucks due to the additional sheet metal, the people-hauling Hummer should weigh less than the cargo-carrying variant. As we reported in April 2021, its output will be limited to 830 horsepower because it's 20 inches shorter than the truck, and the bigger battery pack doesn't fit in this footprint.

2022 GMC Hummer EV shows off accessories ahead of SEMA

As is the case with nearly every new off-roader on the market, the 2022 GMC Hummer EV will have a bunch of accessories available for personalizing the big electric pickup truck. In fact, GMC says that the total number of add-ons is close to 200. But for the SEMA show, it's sharing just a few of what it says are the more interesting accessories. Quite a few of these parts will take you a long way to turning the Hummer EV into an overlander. The most obvious is the roof-top tent that utilizes mounts on the roof and the bed. It looks quite large and roomy. Naturally, auxiliary lighting is available, too, including a 50-inch roof light bar and two smaller spot lights that mount ahead of the A pillars. For storage, there's a nifty swing-out toolbox, shown in the gallery as more of a tackle box, plus a battery-powered cooler and a bed-mount for a full-size spare tire. There's also a more traditional bed extender and simple bed rail-mounted rack. And just for fun, you can get a Kicker audio sound system built into the MultiPro tailgate to listen to your music. Not all the accessories are about utility, though. There are some visual enhancements such as the red decals shown in the gallery. They match other decals and badges available, and they're offered in bronze, too. There are some branded puddle lights on offer as well. These should be available around when the Hummer EV pickup goes on sale next year. Pricing for each part will surely vary, though exact numbers haven't been announced. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.