2006 Hummer Low Miles Custom Wheels And Tires 3rd Row Seat on 2040-cars

Auto blog

Mil-Spec 006 Hummer H1 born into the darkness

Mil-Spec Automotive is up to build number six of its Hummer H1s, this one a customer commission for someone with the last name "Bane." This marks the halfway point in the Launch Edition series of 12 models that will run through to next year. Per customer request, the template started with Build 002, also a four-door slantback, but deviates in a few functional ways. That starts with the four-door slantback variant, but this one gets a much larger rear window. The Bold Body and Tire Package stretches horizontal footprint by eight inches, the bodywork by seven inches. Fender flares hulk over 20-inch gun-black rims wearing 38-inch Nitto Grappler tires. Build 006 shuns the executive interior package on Build 002, putting its cushiness on the outside with the Air-Ride Package. That installs eight-way adjustable shocks all around and automatic ride height adjustment. Sounds like the buyer could need it, since the newest unit also gets the 12K Package that ups GVWR to 12,000 pounds, with beefier axles, springs and braking. A 6.6-liter Duramax diesel sits beneath the $1,299 functional hood scoop, the oil-burner's output rated at 500 horsepower and 1,000 pound-feet of torque. And no road trip to Sonora or Medellin would be complete without a 12,000-pound Warn winch, lavish front brush guard and heavy duty rear step bumper, aluminum snorkel, 60-inch overhead light bar, and Paracord interior door handles. We'd think a locking front axle would be a given on this kind of rig, but apparently this H1 makes do with an ARB air locker on the rear. The brief for the design was "simple yet dramatic." Job done, we'd say, with Build 006 terrorizing the ground like black thunder. The price gets attention just as well: $295,039. This kind of drama doesn't come cheap. Featured Gallery Mil-Spec 006 Hummer H1 View 13 Photos News Source: Mil-Spec Automotive Hummer Truck Luxury Off-Road Vehicles Special and Limited Editions hummer h1

2023 Hyundai Ioniq 5 Cupholder Mega Test: Will the Nalgene bottle fit?

I absolutely adore the Hyundai Ioniq 5, and so was excited to spend a week with it when the EV landed in my driveway. When I first drove the Ioniq 5 in San Diego, though, I hadn't packed my favorite style water bottle: the big 32-ounce Nalgene. Despite it being the best, its sheer size makes it less ideal when trying to pack light for a short trip. It also means it doesn't fit in most cars' cupholders, but, without the bottle on hand, I'd have to wait until this new opportunity with the Ioniq 5 to find out if it passes the Nalgene check. So, let's get to it. Starting at pole position — the front cupholders — we find ourselves unlucky so far. It's not even close to fitting. Not unusual, but our first option for convenient access to megahydration is denied. In most instances, our next best bet is the molded pockets in the front door panels. Here we have success. It's quite a tight fit, so while our drink won't be knocking or rolling around, it's not as easy as it could be to retrieve while driving, and I'll probably eventually wear out the little plastic tether connecting the lid to the bottle, as that's the easiest thing to grab without looking. Still, I'll give these door holders a pass. How about the folks sitting in back? Where can they stash their Nalgenes? No surprise about it not fitting in the center armrest cupholders after our inauspicious start with the fronts. The fact that it won't fit in the door panels is disappointing. C'est la vie. But one more thing ... you might have noticed another potential stash up front in the storage cubby below the center stack. The Nalgene fits in there just fine, but a little bit of extra room means the bottle will be knocking around. It's actually a decent spot, and more accessible than the doors.

GM renames its Detroit-Hamtramck plant Factory Zero

Maybe we'll win, saved by zero. General Motors on Friday announced that its sprawling Detroit-Hamtramck facility, which is being retooled to build electric vehicles, has been renamed Factory Zero — as in zero emissions, along with the promise of an autonomous future in which there are zero crashes and zero congestion. The company is spending $2.2 billion to retool the plant into a futuristic facility that is flexible enough to build a variety of cars and trucks across the GM portfolio of brands. GM says that's the most it has ever spent on a production facility, and when the plant's cranking out EVs at scale it will have created 2,200 manufacturing jobs. Factory Zero's first projects will be the all-electric GMC Hummer pickup and the self-driving electric Cruise Origin, both build on GM's new Ultium battery platform, with other EVs to follow. Factory Zero should start cranking out Hummer pickups by fall 2021. A Hummer SUV will come along later. Check back with Autoblog when the Hummer is revealed next Tuesday, Oct. 20. Sustainability will be another key feature. During construction, excess concrete from pours in the plant has been used to pave roads, and stormwater runoff is being recycled to charge the factory suppression system and circulate in cooling towers. The 365-acre site also has 16.5 acres of wildlife habitat — GM says monarch butterflies hang out there, along with foxes and wild turkeys. GM says it's committed to powering all its southeast Michigan plants with sustainable energy by 2023, the rest of its U.S. facilities by 2030, and overseas plants by 2040. To that end, Factory Zero has a 30-kilowatt solar carport, and a 516-kilowatt ground-mounted solar farm, from DTE. “Factory ZERO is the next battleground in the EV race and will be GMÂ’s flagship assembly plant in our journey to an all-electric future,” said Gerald Johnson, GM executive vice president of Global Manufacturing. “The electric trucks and SUVs that will be built here will help transform GM and the automotive industry.” Related Video:     Green Hirings/Firings/Layoffs Plants/Manufacturing GM Hummer hamtramck